Be as resilient as a rubber BAND

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

John walked into work and problems came at him from all directions. Schedules for product lines had changed; there were messages from two angry customers, and a text from his daughter saying she needed the homework that was sitting on the kitchen table. The problems felt overwhelming and continued to ruin his day and his mood, which affected those around him, and his ability to do his job well, which led to a “behind closed doors” meeting with the boss. That same day, Sally arrived at the office faced with similar problems on her desk along with having to fill in for a co-worker who didn’t show up. But these challenges didn’t throw Sally off track. One by one she handled the issues, which lightened the office mood for those around her, leading to a “closed door” meeting with the boss that resulted in a promotion! John went into Sally’s office, slumped into a chair, and asked…"What’s your secret?”

Fictional situation? Of course. But this scenario is played out in businesses every day. Seldom does anyone have a perfect day. On the manufacturing floor it’s discovered that a vital part doesn’t fit or a customer calls at the last minute with a design change. You worked hard to put together a project status meeting and at the last minute two critical participants call to say they aren’t coming. A financial planner faces a market crash leading to panicky investor calls, while a writer faces a computer crash, leading to the complete loss of last week’s work. So how does Sally breeze through the same problems as John, but come out on top in the end? Two words that our military service members depend on to help with creative problem solving: Resiliency and Sustainability. Both involve the realization that it’s not what happens to you, but rather how you handle it that matters when it counts. This is when problem solving becomes a critical life skill. 

Resiliency is the ability to recognize, recover from and adjust to misfortune or change. Sustainability says that you’ve figured out how to get through a situation effectively and have come out the other end better for it. Resiliency and sustainability function together as you figure out how to identify stressors that work against you and begin to set the path that brings you through them. It’s just like a rubber band – a crisis stretches you to the limit and when you’ve solved it, you return to where you were before. With the application of four simple tools from the acronym for BAND, you can solve problems like Sally does.

B – BREATHE. As stressors appear, begin by stepping back (physically, mentally or both) and taking a deep breath. Just this action alone helps you to clear your head which allows better processing of information that is about to come at you. Breathing helps relax your muscles and lets your mind begin to work with the situation at hand. This is also the time to try to diffuse and remove emotions that might be present especially if you’re dealing with angry people. It’s hard to help a customer if they are still venting about their problem. Can you call on the help of others…even a neighbor or co-worker…to help you put things into perspective?

A – ASSESS. Now that you have a clearer head, and hopefully taken emotion from the equation, start to prioritize what steps to take to make a solution as close to a WIN-WIN as possible. Ask yourself “What’s the specific problem, who’s affected by these circumstances, what is the most critical piece to be handled first?” In this step, you are only identifying and prioritizing your steps, not acting on them. In the case of finding a customer design change request on your desk, you might assess that your No. 1 priority is to call the customer for more information, followed by determining if an engineer is available to draft the change.

N – NAVIGATE. You know the problem and have designed solution steps. Now it’s time to act on your plan. Look ahead and determine exactly what you want to have happen when a good solution is reached. What will the “perfect solution” look like? Implement your plan based on this desired outcome. As you execute each step, occasionally pause to look at what’s happening. Are you on the way to your desired outcome? Make whatever adjustments are needed along the way. Are you positively involving the people who need to be included in the solution? Doing this helps them feel you are working with them and not against them.

D – DETER. You did it! You dealt with your circumstances and came out on the other end. Whew, one down, more to come. This is the time to put steps in play that can deter the situation from happening again. What did you learn from this to help you set up parameters to avoid future issues like the one you just experienced? Step one: Think of a problem as a paper chain. Problem “links” can develop into hazardous situations. Identify the good and bad links (people, experiences, outside forces) in the chain. Sometimes removing a link can make the chain stronger when put back together. Step two: In order to prevent problems from happening again, you need to truthfully determine the level of control you have over each circumstance and problem factor. Eliminate or adjust what you have control over, and “let go” of those areas beyond your immediate control. Step three: Establish your safety net. Your safety net consists of your current contacts and any new ones you’ve built over the course of solving this problem. You learned things about yourself and those around you. Who stepped up when they were needed? Keep the information for those support personnel close at hand so it’s there when you need it…next time!

Now before you think that going through this process will take too much time, remember that as you get comfortable with the steps, BAND can happen in a matter of seconds. It’s the idea that you are applying practical problem solving skills quickly and instinctively to help you do a better job, get along better with your family, and finish a day feeling that you can…and did…excel in your ability to take care of things.

Elaine Dumler is an author, speaker and “separations expert” who helps military families transition through all phases of deployment. Using techniques and strategies she taught military families, Elaine helps business people improve morale, profits and productivity. Her books, “I’m Already Home…Again” and “The Road Home” provide resources and connection strategies for maintaining life balance. For more information, call (303) 430-0592 or visit www.ImAlreadyHome.com.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Related Articles

No matching related articles at this time.



Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


LPV Seed Treater

The LPV Seed Treater has set a new standard boasting three configurable weighing methods for any-sized operation, a standard 42” ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form