Metribuzin injury in wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

There has been more metribuzin injury on wheat stands this year than we have seen in more than a decade. This has been very evident in research trials as well as walking some grower’s wheat fields. Metribuzin rates as low as 2 to 3 oz/A has occasionally thinned wheat stands in some fields.

The best example of this is the metribuzin wheat variety tolerance screen we conduct across the back end of some of the county wheat variety tests. In each year we conduct the study, we examine two metribuzin rates, 6 and 12 oz/A.  In the past, we rarely if ever saw any wheat varieties show injury to the 6 oz/A rate, which is why we also look at the higher 12 oz/A rate. Often we only saw 30 to 40% injury with susceptible varieties even at that high rate.

This year in a couple of the county wheat variety tests, we had 70 to 95% injury at that higher rate across all the varieties and anywhere from 20 to 70% injury at the lower 6 oz/A (Picture right).

Fortunately, most Tennessee growers use rates that range between 2 to 3 oz/A. As a result, wheat stands in most injured fields are for the most part still robust enough to produce a good crop.

So what caused this increase in wheat injury? I think there are a number of reasons for this.  First, there was more metribuzin applied in the fall of 2013 than in past years which increases the odds that an environment could be found that would promote injury.  Second, this herbicide was applied to wheat that was often late planted and had not gotten its frst tiller at time of application. Most wheat varieties have much better tolerance to metribuzin once it reaches its first tiller.

On top of this, the very cold winter really curtailed the wheat’s ability to overcome fall injury. More injury was found in areas where wheat was covered with several inches of ice for a week or more.

On the positive side, 2 to 3 oz/A of metribuzin applied in the fall did provide enough control of poa and ALS-resistant chickweed that the loss of stand was more than offset by the wheat not competing with those two competitive weeds (picture right).

I think the take home point here is that metribuzin can be a very effective tool, particularly on poa and ALS-resistant chickweed. However, it should be used with caution by utilizing it on wheat that has developed a tiller and at rates no higher than 3 ozs/A applied in the fall.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Conveyor Equipment

Adams Fertilizer Equipment manufactures several styles and types of conveying equipment including: chain drag conveyors, bucket elevator legs, stationary and ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form