ARS, Industry Cooperation Yields Device to Detect Insects in Stored Wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Source: Agricultural Research Service

A laboratory milling device for improving stored grain management has been developed by Agricultural Research Service (ARS) scientists and an industry cooperator.

The system, called the "insect-o-graph," can detect internal insects in wheat that are not visible to the eye or that cannot be detected by usual grading methods. The device, built by National Manufacturing, Inc. (NMI), of Lincoln, Neb., was based on ARS-developed technology.

ARS engineers Tom Pearson and Dan Brabec, in the Engineering and Wind Erosion Research Unit of the agency's Center for Grain and Animal Health Research at Manhattan, Kan., developed the device, which uses electrical conductance signals to monitor wheat as it’s milled. If a seed containing an insect is crushed, an electrical spike occurs. The software counts the number of insects in a kilogram sample. This system can detect low levels of infestations such as five to 10 infested seeds out of 30,000 good seeds.

Tracking insect infestations in stored grain is important to ensure grain quality because insect colonies can multiply rapidly over weeks or months, and consume and damage grain as the colonies grow. Insect damage reduces the grain's value, and the grain also requires additional cleaning to remove the insects and damaged kernels.

Grain companies inspect grain as it comes into their facilities and before storage. Before unloading a truck or railcar of grain, a few minutes are taken to sample the load and inspect the grain. The insect-o-graph can estimate the number of live insects hidden in a one-kilogram grain sample in about one minute.

The device was developed under a formal Cooperative Research and Development Agreement (CRADA) with NMI, and in collaboration with the food manufacturing company General Mills, as part of efforts by ARS to transfer its technology from the laboratory to the marketplace for the benefit of consumers.

A paper describing this work was accepted for publication in the Journal of Stored Product Research in 2010 and will be published soon.

ARS is the principal intramural scientific research agency of the U.S. Department of Agriculture (USDA). The research supports the USDA priority of promoting international food security.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Related Articles



Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


1325 Bushel Grain Cart

Equipped with a 22” computer balanced auger with 5/16” flighting,the unloading speed is 50% faster than smaller grain carts with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form