Snow cover, temperatures, and wheat condition

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


Winter wheat can normally withstand cold temperatures well as long as soil temperatures at the depth of the crown are not in the single digits for a prolonged period of time. Winter wheat typically has its highest level of winterhardiness in December and January. Leaves on wheat exposed to very cold temperatures may turn brown and die back somewhat, but that doesn’t necessarily mean the entire plant is dead. Soil temperature is a more important consideration than air temperature alone during the winter.

click image to zoom In most cases so far, soil temperatures have not been cold enough to create concern for the wheat. However, the chart below from Mary Knapp, K-State Weather Data Library, shows there are a few areas of concern, especially where soils are dry or there was no snow cover during periods of extreme cold. For example, soil temperatures at the 2-inch depth reached 9 degrees at Scandia, in Republic County.

Will this cause some winterkill in those areas? It’s too soon to know, but the situation should be monitored – especially on terrace tops and north-facing slopes. I wouldn’t be surprised if there is some damage to the wheat in parts of north central Kansas where soil temperatures were this low. Later this winter, producers could dig up some plants and bring them inside. After a week or so of warm conditions and water, wheat should begin greening up if it is alive. Otherwise, producers can wait until spring greenup begins in the field. Areas of dead or dying wheat should be noticeable at that time. Be aware, however, that damaged wheat may begin to green up then die back later.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


RoGator® Direct Chemical Injection

Direct chemical injection is a key benefit available with RoGator RG900, RG1100 and RG1300 sprayer models. This optional system saves ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form