Pre-emergence herbicide use on wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


There are five herbicides labeled for preplant or preemergence use in wheat: Amber, Finesse, Maverick, Olympus, and Pre-Pare. Each of these products is an ALS-inhibiting herbicide with residual activity.

In wheat, preemergence herbicides are often used in no-till situations where they can be tankmixed with glyphosate during burndown applications just prior to or at planting. The addition of one of the labeled sulfonylurea herbicides at the time of the final burndown application can give residual control of susceptible broadleaf weeds and suppression of cheatgrass.

Preemergence treatments in wheat can be inconsistent in effectiveness. They require rainfall to be activated. If weeds and cheatgrasses emerge before the herbicide is activated, control may be poor, especially the grasses. But when there is enough rain to activate the herbicide before weeds and cheatgrasses emerge, control or suppression can be good. However, all else being equal, most of the herbicides labeled for preemergence applications will be most consistent when applied as fall postemergence treatments.

The labels of these herbicides differ somewhat in what is allowed with a preemergence application.

Finesse allows for a higher use rate when applied as a preemergence than when applied as a postemergence treatment. This can provide for good season-long control of susceptible broadleaf weeds, unless they are ALS resistant. However, it does not allow for a follow-up postemergence treatment later with Finesse, although a followup treatment with Olympus or PowerFlex is allowed.

With Amber, the top-end of the range of rates allowed is a little higher for preemergence applications than with postemergence applications. As with Finesse, if Amber is used at the higher rates as a preemergence, producers cannot come back later in the season with another application of Amber, although a followup treatment with Olympus or PowerFlex is allowed.

With Olympus, the allowable rate as a preemergence application is 0.6 oz/acre, which is lower than the rate allowed if Olympus is used as a postemergence treatment. However, producers are allowed to follow up later with another 0.6 oz/acre of Olympus if needed.

Maverick has a single standard rate for all application timings. Pre-Pare is marketed primarily in the northern plains and has not provided very good preemergence cheatgrass control in research at K-State. 


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Mobile Weather

Mobile Weather uses a third-party weather sensor connected to the Application Controller 1120 to display real-time weather information, including wind ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form