Hessian fly problems becoming apparent in N.C. wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Over the last week, I have received calls and talked with farmers from both Pasquotank and Pamlico Counties about Hessian fly. Both of these counties seem to have historical Hessian fly issues, not only because of rotations (continuous wheat after beans), but I think because these areas have a unique climate from much of the rest of the state. As a result, I’m not too surprised to hear of these issues, but the damage is particularly severe in Pamlico County and has mainly been found on timely planted wheat. Also, we had a very heavy egg lay this fall in some areas (previous article). I am worried for other parts of the state that don’t normally see Hessian fly.

It is important to scout your wheat to determine if symptoms you are seeing (yellowing, lack of vigorous growth, poor tillering, etc.) is a result of Hessian fly or something else. Other causal agents of these symptoms could include things like cold weather, lack of nitrogen, and wetness. Hessian fly are present as pupae in the fields at this time of the year. To scout for pupae, carefully dig up tillers below the soil and peel back the outer layers of leaves. Often pupae will fall out into the soil or will be feeding on the base of the plant behind these leaves.

Once you have determined the presence of Hessian fly, you need to make a decision about what to do with your field. Our resistant varieties are still holding up well, so you should focus on fields that are planted with a susceptible variety (listed here). Then separate your fields with susceptible varieties into three categories independent of planting date.

1) Fields that have some Hessian fly from the fall generation and are planted with a susceptible variety. Research from our state has shown that these fields will not benefit from a spring foliar spray. All fields with a susceptible variety likely have Hessian fly at some level. The vast majority of fields in our state fall into this category.

2) Fields that are moderately infested with Hessian fly from the fall generation and are planted with a susceptible variety. These fields may benefit from a spring foliar spray, but timing will be critical. Try to time the spray for warm weather in mid-March. You can improve your chances for spray effectiveness by looking at the progression of pupae development. When you squeeze them and they begin to pop pink or red, instead of white, they are close to becoming adults. Remember that we are timing the spray to kill adults, so you should try to hold off your spray until most of the pupae are developed or some have emerged. Any pyrethroid can be used. The cutoff for this category (heavily infested) and the previous category might be somewhere around 50% infested tillers from the fall generation.

3) Fields that are severely infested with Hessian fly from the fall generation and are planted with a susceptible variety. Unfortunately the best option for some fields will be to till them up. Fields approaching a 100% rate of infested tillers with plants that are dying or dead will fall into this category.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left


Meridian’s conveyors deliver seed with unmatched versatility. Meridian’s transport conveyors are manufactured with heavy-duty, fully enclosed construction. Meridian’s cross cleated ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form