Winter grain mites in wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

There have recently been some reports of winter grain mites in wheat fields in Kansas. Winter grain mites are most prevalent on fields that have been dry. If an infested field receives some rain in the near future, that should help plant growth and reduce winter grain mite populations in most cases. If an infested field remains dry, it may be worth treating. For more information on control options, see K-State Research and Extension publication Wheat Insect Management 2013, MF-745 at:

The following information about winter gain mites is from a K-State Entomology fact sheet:

The winter grain mite is known to be a pest of small grains and grasses throughout the temperate regions of the world. Heavily infested fields take on a grayish or silvery cast as a result of the puncturing of plant cells as the mites feed. Many times the infested plants do not die, but become stunted and produce little forage or grain. Damage on young plants is more severe than on large, healthy plants.


Winter grain mites have a dark brown to almost black body with conspicuous reddish-orange legs. Their front legs are longer than the others, but not as pronounced as on the brown wheat mite.

Life History

These mites generally have two generations per year. The first begins in September or October as weather conditions become favorable for the over-summering eggs to hatch. Populations reach a peak in December or January. The second generation develops from eggs laid by the first generation and reaches its maximum density in March or April. Populations then decrease as temperatures exceed the mite's range of tolerance. Females of the second generation lay over-summering eggs. Larvae become active soon after hatching and begin to feed on the leaf sheaths and tender shoots near the ground. The nymphs, as well as the adults, feed higher up on the plants at night and on cloudy or cool days.

As the sun rises, the mites descend the plants and seek protection on the moist soil surface under the foliage during the hot part of the day. Mites damage plants by puncturing individual cells, which cause the leaves to take on a silvery-gray appearance. Heavily damaged leaves will have brown leaf tips. If the soil is dry and there is little foliage cover, mites will crawl into the soil in search of moisture and cooler temperatures.

Temperature and moisture are the most important factors influencing mite development and abundance. Cool, rather than warm temperatures favor their development. Activity of these mites is the greatest between 40º and 70ºF. Oversummering eggs do not hatch in the fall until rains provide adequate moisture. On hot, dry days it may be necessary to dig into the soil to a depth of 4 or 5 inches to find the mites. The mites do not seem to be harmed by high humidity, rainfall, short periods of sleet or ice cover, or by ground frozen to a depth of several inches, in the fall. However, heavy spring rains may cause mite populations to disappear.

Fields with loose, sandy or loamy soils are more at risk than those with hard, clay soils. Significant infestations are more common in central Kansas. Because fall populations develop from eggs laid the previous spring, problems are worse in continuous wheat. Crop rotation is helpful in reducing problems, although field borders may be affected when mites migrate from wild grasses. Control may be necessary if large portions of a field show symptoms and mites appear abundant in relation to the amount of plant growth. Persistent dry conditions can lead to cumulative damage and plant recovery is often dependent on available moisture. 

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Smooth Wall Grain Bins

Meridian’s SmoothWall bins are the ultimate storage bins, used to handle and store fertilizer, grain, feed and seed, and extend ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form