Why worry about Hessian flies in wheat?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The adult Hessian fly is a tiny, dark-colored insect about 1/8 inch long that resembles a large gnat or small mosquito. Females lay eggs on the seedling leaves, which hatch in three to seven days. Newly emerged maggots will move down to the crown of the plant and reside in the grooves of the leaf sheath and stem. They will feed on plant tissue by using their mouthparts like sandpaper and lap up juices that seep out.

Larvae are the only stage that damage wheat; adult flies do not feed. Maggots usually feed on the lower leaves and stems and reduce plant vigor. Infested plants become stunted and stiffly erect, and leaves are thickened with a bluish green color. A single maggot feeding on a plant for three days can stunt a young plant or tiller. Heavily damaged plants usually die during the winter.

Outbreaks of the Hessian fly have caused severe losses in wheat for the past 230 years in this country. It also may damage barley and rye, but not oats. Its damage was first observed in North America in the Long Island, NY area in the late 1770s.

It is not definitely known how the fly arrived from Europe or the time. My favorite story is the one that reports that the fly was found in the vicinity where Howe’s British troops were encamped. It was thought that Hessian soldiers in his army brought the pest from Europe in straw used for bedding; thus its name -- Hessian fly. The Hessian fly moved from Long Island approximately 20 miles annually until it reached the wheat growing region of the Great Plains. Problems associated with the pest and possible control methods are discussed at length in Thomas Jefferson’s agricultural writings.

Hessian flies caused a US shortage of wheat in 1836 that caused economic problems for farmers prior to the Panic of 1837. It was reported in Ohio agricultural reports as early as 1847. In the latter part of the 1800s Hessian fly infestations were specifically reported in Crawford, Defiance, Seneca, and Wood counties of Ohio. Serious outbreaks occurred in Ohio in 1895 and 1920. Parts of Indiana had serious outbreaks as late as the early 1960s.

A “fly free” date was observed as a possible control practice as early as the late 18th century in the Mid-Atlantic States. The Ohio Agricultural Experiment Station started using fly free dates for Ohio from 1911 to 1919. Nation-wide fly-free dates were established from studies conducted during1918-1935. The dates used today in Ohio and other states were a result of this research.

Resistant variety programs were initiated in our region in the 1940s. New varieties with Hessian fly resistant genes were heavily introduced between 1950 and 1983. The low incidence of damage from Hessian fly in Ohio today can be attributed to both host-plant resistance and planting date. However, over the past decade surveys have shown that the genes are no longer effective against a new emerging biotype of Hessian flies. With the loss of plant resistance, planting date will once again be our main defense against devastating yields losses to Hessian fly. With global warming, new research may be required and the dates adjusted as our climate changes.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


X-TENDED REACH GRAIN CARTS

YOUR BEST HARVEST IS NOW WITHIN REACH J&M introduces their patented line of X-tended Reach grain carts, featuring a frontfolding single ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form