Pros and cons of burning wheat residue before planting

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


click image to zoomPhoto by Jim Shroyer, K-State Research and Extension.Figure 1. Wheat residue being burned just ahead of wheat planting, September 30, 2013, Dickinson County. If producers choose to burn their wheat stubble, timing is important. It’s best to burn as late as possible, close to the time of wheat planting. This minimizes the time that the field will be without residue cover and vulnerable to erosion of surface sealing. Before burning, producers should first check with the Farm Service Agency to find out if this will affect their compliance in any government farm programs.

Advantages of a late-season burn:

  • Removes residue cheaply and quickly. If the producer’s drill or planter has a hard time going through wheat residue, or the amount of residue is unusually heavy, this can be an advantage.
  • Can control tan spot disease. Tan spot spores oversummer on wheat residue, and burning will usually kill most of the spores.
  • Can help control take-all. Take-all seems to be a bigger problem in continuous wheat on cooler, wetter soils. Burning off the residue results in a warmer, and potentially drier, seedbed. Burning late, however, can reduce the beneficial effects mid-summer burning has on take-all.
  • May help control Hessian fly. This is one “advantage” that’s a little more hype than reality. Hessian fly flaxseed oversummer in wheat residue and in old wheat crowns. Some, or most, of the flaxseed is at or below ground level in the crowns. These flaxseed will not be controlled by burning. A slow, hot fire can kill flaxseed that is in residue above ground, however.
  • May help control winter annual grasses, volunteer wheat, and summer annual broadleaf weeds. This is another perceived “advantage” that is only partially true. It takes a very slow, hot fire to kill cheat and volunteer seed present on the soil surface. Usually, the control is only partial. Cheat and volunteer seed that is in the soil will not be controlled by fire. Likewise, a slow, hot fire can kill summer annual broadleaf weeds that are up and growing in the field. Burning may knock back volunteer wheat if the fire is hot enough, but the growing point is below the soil at this time of the year and the volunteer may come back strong if there is good moisture and no competition from other grasses and weeds. A fast fire will be relatively ineffective in controlling weed seeds and emerged weeds and grasses.

Disadvantages of a late-season burn:

  • Removes a major source of organic matter from the field. The residue and stubble are an important source of organic matter for the soil. Burning off this organic matter will gradually reduce soil organic matter levels.
  • Can harden the ground. Burning can made the soil hotter and drier on the surface, creating a hard seedbed. 
  • Reduces water infiltration capacity. Burning can temporarily seal the soil surface to some extent.
  • Loss of nutrients. Wheat straw contains many nutrients. Burning will result in the loss of some of the volatile nutrients, such as nitrogen, in the residue. Phosphorus and other minerals are not volatilized by burning and will remain on the field in the ash, unless the ash is blown away.
  • Results in smoke pollution. Air quality concerns are greater now than in the past.

click image to zoom What about the effect of burning on wheat yields in continuous wheat, compared to tillage and no-till? Mark Claassen, former agronomist-in-charge at the Harvey County Experiment Field, conducted a long-term study of this since 1997. His results show the long term average yields are similar for all treatments, so burning neither helped nor hurt wheat yields.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (3) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

k s sandhu    
india  |  October, 10, 2013 at 09:17 AM

I want to add this also that as the wheat/rice straw has a very wide C:N ratio,the bacteria involved in its decomposition consume a significant amount of soil nitrogen and that gives an initial set back to the newly planted wheat crop, because the soil N content drops.

Daniel Hiller    
Ohio  |  October, 10, 2013 at 11:00 PM

to over come the c/n ratio problem, a few gallons of 28 on the straw after harvest just before a rain and let the microbes start breaking it down in the summer so there is less residue on the ground when you plant. you will get the N you apply back later when the humus breaks down.

john t    
ohio  |  December, 31, 2013 at 09:13 AM

can you tell me what is the exact nutrient value of wheat straw residue. What percent is above ground, what is below? Are there studies that have burned a ton of straw and tell what is there as far as N-P-K? Need to know to put fair value on straw residue that will be sold to bale.


FarmRite

FarmRite allows service providers to process more acres and to produce cutting-edge information reports in less time and with less ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form