Low test weight wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


Although many wheat fields appear to be a week to 10 days or more away from harvest maturity, those in particularly dry areas are progressing quickly. A few fields in south-central South Dakota have already reached maturity, but as they began to harvest the crop, the producers quickly learned that the test weight was very low. One field produced wheat that weighed 47 lbs. /Bu. As test weights drop below 60 lbs. /Bu, discounts begin to mount. The lowest test weight that wheat can be marketed at grain elevators is 50 lbs. /Bu., with discounts in the neighborhood of $0.70/Bu at that level.

There are several potential reasons for wheat being low in test weight, including drought, root and crown rots, viral diseases, fungal or bacterial foliar diseases, scab, etc. It is difficult to determine the test weight of a wheat crop until it is mature and harvested, but the presence of a substantial percentage of shriveled kernels should raise a red flag.

If wheat is low in test weight, one strategy may be to open the sieves on the combine and turn up the wind in hopes of blowing some of the lighter, shriveled kernels out the back. Harvested wheat that is light might also be cleaned aggressively in an attempt to gain test weight. If the majority of the kernels are lighter and shriveled, the potential of gaining much test weight by is likely to be limited. If using either of these strategies, producers would need to compare the benefit of gaining test weight against the yield loss due to blowing the light seeds out the back of the combine or aggressive cleaning.

The remaining options are to harvest the wheat to sell as feed wheat at a significant discount, or harvest as hay. Unfortunately, crop insurance may not offer substantial coverage for wheat that is low in test weight. The adjustment for light wheat doesn’t reach significant levels until the bushel weight drops into the low 40 lb. /Bu range. If producers suspect they may have wheat that is low in test weight, they should contact their crop insurance agent to evaluate their options before cutting for hay or harvesting the crop as grain. If considering harvesting the crop as hay, check herbicide, fungicide or insecticide labels of any products that have been applied for the pre-harvest interval or if the label allows harvesting as hay.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (1) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

k s sandhu    
punjab,india  |  July, 22, 2013 at 10:22 PM

Application of N induces deeper rooting which enables the crop to extract moisture from the deeper soil layers and hence help the crop to fight drought which in turn will take care of the low test weight.So the availability of N in the soil should be ensured at the time of seeding.


ISOLynx

Ally Precision Industries brings new leadership to the future of precision agriculture through its offerings of superior technology and up-to-the ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form