Strip-tillage crop management

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

As attention increases on protecting Midwest water bodies from agricultural fertilizer and sediment runoff while diesel fuel prices rise, farmers and landowners may be interested in learning more about strip-tillage as a farming practice. Strip-tillage conserves soil and valuable crop fertilizer nutrients while reducing fuel and related operating costs.

Improved planting equipment and herbicides make no-till crop management an option. Long-term no-till crop management very effectively reduces soil erosion, restores soil structure and improves water infiltration. But heavy Des Moines Lobe soils typical of north-central Iowa and southern Minnesota farmland commonly feature poor internal drainage and can be slow to warm in the spring. Increased amounts of surface residue typical of no-till crop management can be a hindrance if not managed properly. This can result in planting delays and poor early seedling vigor of no-till planted corn, potentially reducing grain yields.

Strip-tillage crop management may be a viable alternative to full-width tillage.

Strip-tillage is a happy medium between the benefits of no-till and the drawbacks of traditional full-width tillage. Farmers considering strip-tillage should evaluate the costs and benefits to decide on the best fit for their farming operation. Specific components of a strip-tillage implement vary, but the basic configuration includes coulters, disks, a subsurface shank or mole knife to inject fertilizer at depth within the tilled strip, and covering disks.

Making the Switch

When switching from full-width tillage to strip-tillage farmers must understand that they are making the transition to a system that requires a higher level of management. With strip-tillage, correcting primary tillage traits (e.g. soil clods or wheel tracks) with a spring seedbed preparation pass is eliminated—the subsequent crop’s seedbed is being established with a single strip-tillage operation in the fall or early spring. This makes it especially important to monitor soil moisture conditions as well as the condition of the soil berms being created by strip-tillage equipment. As with any tillage operation, avoid field operation when soil conditions are too wet, as clods and compaction can result.

Before investing in your own equipment, ask a neighbor with strip-tillage experience to custom strip-till a portion of one of your fields to demonstrate how best to set up and adjust the equipment. Newcomers to strip-tillage quickly recognize the importance of proper equipment set-up, monitoring and willingness to make adjustments based on soil and weather conditions.

Fertilizer Application

Strip-tillage allows the farmer to prepare the seedbed only, or to simultaneously subsurface apply nitrogen, phosphorus, and potassium fertilizers in the bottom of the tilled strip. Some farmers broadcast dry phosphorus and potassium fertilizer and follow up with the strip-tillage operation. This approach incorporates dry fertilizer into the tilled soil strips where it is readily available for uptake by young crop seedlings. Many farmers apply anhydrous ammonia fertilizer as part of their fall strip-tillage operation; however, it is important to balance fall strip-tillage with the need to delay anhydrous ammonia fertilizer application until soil temperatures stabilize below 50°F degrees. Cooler soil temperatures slow the rate of microbial conversion of ammonia to nitrate and reduce the risk of subsurface nitrate losses to groundwater.

Strip-tillage should not be seen as a substitute for no-till on highly-erodible land, where the tilled soil strips are subject to water erosion. This is especially true if the farmer strip-tills up and down field slopes, rather than following the contour.

Equipment Needed

Experienced strip-tillers emphasize the need for sufficient tractor horsepower to pull the equipment at optimum speed and operating depth for proper coulter and knife action, building the soil berm. A rule of thumb is to have a tractor with 15 to 20 horsepower (HP) per row of strip-tillage. For example, a 250-275 HP tractor will be needed to effectively pull a 12-row strip-tillage bar. This will allow operation of the equipment at about 5 to 6 MPH and at proper depth. Operating the equipment at greater depth and speed will require more tractor horsepower.

Strip-tillage can be implemented without precision guidance tools but most farmers suggest that dollars spent on the most-precise level of accuracy, such as RTK (Real Time Kinetic) guidance, is worth the investment. Effort should be made to plant the crop into the center of tilled strips. RTK guidance technology with sub-inch accuracy helps match up last fall’s tillage and this spring’s planting operations. Use of RTK guidance also reduces the need to match planter and strip-tillage equipment width. For example, an eight-row strip-tillage bar, with a lower investment cost and tractor horsepower requirement, can confidently be matched with a 12-, 16-, or 24-row planter.

Strip-till Advantages

Farmers who have adopted strip-tillage cite several advantages to using the practice:

• Soil conservation. Strip-tillage offers potential to reduce soil erosion because crop residue is maintained between the strips of tilled soil.

• Reduced fuel usage and labor requirement. In recent years more row crop acres are planted to corn-on-corn production. Full-width tillage corn-on-corn management may require multiple in-field passes between fall harvest and spring planting including cornstalk chopping, fall primary tillage (disk-chisel and other more aggressive forms of tillage) and one or more secondary spring tillage passes (field cultivator, disk, or soil finisher). Eliminating the need for spring pre-plant full-width tillage reduces labor costs, accelerates the pace of planting and fewer passes across the field means fewer gallons of fuel are being used.

• Improved fertilizer nutrient placement. Some farmers using strip-tillage choose to apply nitrogen, phosphorus, potassium and other fertilizer nutrients in-furrow with the strip-tillage operation. In-furrow fertilizer placement makes the nutrients readily available for young corn and soybean seedling growth and has potential to improve fertilizer use efficiency.

• Improved soil structure and water infiltration. Long-term no-tillers cite improved soil structure and improved water infiltration as benefits of eliminating tillage. But slow emergence and early vegetative growth of corn and soybean on poorly drained and colder soils can reduce crop yields. Strip-tilled soil warms and dries quickly for timely planting of corn and soybean. Surface crop residue between rows holds up the tractor at planting and may allow earlier planting than tilled fields. Farmers using strip-tillage also report that there is less ponding and surface runoff in heavy rainfall, when compared to their neighbors’ full-width tilled fields.

Innovative, successful farmers are enjoying the benefits of strip-tillage crop management and each farmer implements strip-tillage differently. It can be as simple as creating the tilled strips for seedbed preparation or as detailed as merging seedbed preparation and fertilizer nutrient application into a single field operation.




Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (1) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

Mike Petersen    
Nebraska  |  February, 04, 2014 at 12:26 PM

In the world of broad acre tillage to direct seeding, what is called No-Till, we in the Strip-Tillage world would prefer to consider Strip-Till not just a transitional step to Direct Seeding. Creating a proper seed bed, being precise about placing nutrients in the root zone and lastly establishing a optimal root zone to finish the crop is very important for top crop production when inputs are continually on the rise. Strip-Tillage accomplishes all of that to assist any row crop grower reach his/her goals in agriculture dependent upon climatic conditions of course. Yes the article describes some of the benefits and attributes of what Strip-Till is about, there are many more. Growers that have adopted Strip-Tillage are seeing their Soil Health conditions improve, worms making a comeback, water intake of the soils better, soil organic matter values from soil tests rise and so on. As the lead agronomist for Orthman Mfg I study, observe and evaluate the Strip-Till system all across the U.S.A. and see it not as a transition phase, but a strong stand-on-its-own method to growing row crops for a very long time into the future and helping the soil and water resources along the way. Always glad to discuss the method with anyone based upon a solid soil and agronomic sense.


Blend and Bulk Tower Systems

Waconia Towers provide speed, efficiency and reliability that only gravity-fed systems can offer. Towers are available with up to 300 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form