Virginia soybeans: Factors to consider in rust management

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


Now that Asian soybean rust (SBR) has been confirmed in Suffolk, Va., growers in the state need to make some management decisions in regard to whether or not to spray fungicides for control of the disease. There are two approaches that can be taken at this point: 1) avoid risk and spray or 2) wait and see.

Unfortunately, it is not clear which is the correct approach.

Several factors need to be taken into consideration when deciding how to react to the presence of SBR in the Virginia. These factors are best summed up by what plant pathologists refer to as the “plant disease triangle” which is a visual representation (in the shape of a triangle) of the interaction between the pathogen, crop host, and environment. In the case of SBR, we must consider:

  1. how widespread the soybean rust fungus is in Virginia (pathogen),
  2. the maturity of the soybean crop (host), and
  3. the current weather conditions (environment).

Pathogen

On Sept. 17, 2013, the soybean rust fungus (Phakopsora pachyrhizi) was observed and confirmed on soybean leaves collected from one of the sentinel plots at the Tidewater AREC in Suffolk, Va. The soybeans were not showing symptoms of infection and it was only after incubating leaflets in a moist chamber for over a week and looking at hundreds of soybean leaflets under a microscope that I observed a few soybean rust pustules/spores.

Extension agents have been scouting fields and sending us soybean leaves for analysis over the past several weeks, and thus far Brunswick, Chesapeake, Lunenburg, Mecklenburg Westmoreland, Middlesex, Prince George, Amelia, and Powhatan counties have been negative for SBR (though this does not exclude the presence of the fungus at very low levels). Today my field technician is scouting several counties in the area, and he will bring back soybean leaves to the lab so we can check for the presence of the fungus. This, along with additional samples from Extension Agents, should give us a better idea of how widespread the fungus is in the state.

However, just because the fungus is at a low frequency and symptoms are not visible does not necessarily mean fungicide sprays are unwarranted.

Crop Host

A critical factor to take into consideration for SBR management is the maturity of the soybean crop. Once soybean reache s R6, risk of yield loss due to SBR is minimal and fungicide sprays are no longer needed. However, growers with soybeans that have not yet reached the R6 stage should consider spraying fungicides for control of SBR (triazole or pre-mix fungicide). David Holshouser, the soybean specialist at the Tidewater AREC, has recommended that soybean within 100 miles of Suffolk that has not yet reached R6 be sprayed. This is particularly relevant for late-maturing/double-cropped soybean.

Environment

The Plant Pathology program at the Tidewater AREC is currently working on a weather-based advisory for soybean rust, and we are tracking when conditions are conducive to disease development. Favorable conditions include daily average temperatures between 65 and 78 ̊ F and moisture provided by periods of relative humidity greater than 95% for 10 or more hours per day. The last day in September favorable for disease development was September 9 and the current cool, dry conditions minimize the risk of SBR infection.

By the time SBR is widespread and weather conditions are conducive to the disease, most of the soybean crop in the state may be beyond R6 and no longer at risk. However, soybean rust did show up several weeks earlier this year than in 2012, and some soybean was planted later than usual. Of course no one can predict the future and there is always a certain degree of risk in all aspects of crop production. Hopefully this information and the updates to follow will help growers with decisions regarding management of soybean rust.

Fungicides for Management of Soybean Rust 

Triazole or pre-mix fungicides are recommended for control of Asian soybean rust (SBR). Triazoles have some curative properties whereas fungicides with a strobilurin mode-of-action are protective in their activity and have little effect on established infections. Fungicide applications should be made prior to disease onset and when conditions are conducive for disease. Timing of fungicide sprays should be based on regional advisories or at the first sign of rust in the immediate are. Fungicides should be applied when soybeans are between R3 and R6 stages of development. If disease pressure is high, multiple applications may be necessary. Always consult pesticide labels prior to use


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


ISOLynx

Ally Precision Industries brings new leadership to the future of precision agriculture through its offerings of superior technology and up-to-the ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form