The relationship between the causal agent of SDS, SCN

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Soybean Cyst Nematode (SCN) is an economically important pest of soybean in Wisconsin. It was first discovered in the southeastern part of the state in 1981 and now is found in over 90 percent of the state’s soybean acres. It is caused by the soybean cyst nematode, a non-segmented roundworm that inhabits the soil. More recently, another economically important disease of soybean, Sudden Death Syndrome (SDS), was first found in southeastern Wisconsin in 2006. A fungus found in the soil called Fusarium virguliforme is the causal agent of SDS.

Soybean Cyst Nematode (SCN): In high-yielding fields or during years when soil moisture is plentiful, profoundly visible symptoms of SCN are rarely seen. Subtle symptoms include uneven plant height, a delay in canopy closure, or early maturity. Severely infected plants appear stunted with yellow foliage, and canopy closure may be delayed or not occur in affected areas. Management of SCN should begin by sampling soil to confirm the presence of the nematode. For a detailed description about sampling for SCN in WI, see the pamphlet titled Soybean Cyst Nematode Sampling and Testing in Wisconsin. Additional management should also include an integrated plan where crop rotation and resistant cultivars are be used. Rotating to non-hosts of SCN can help reduce SCN populations in soil. Cultivars resistant to SCN should be planted when numbers of SCN are above suggested thresholds, and sources of resistance (e.g. Peking vs. PI 88788) should be alternated in fields with high populations. When SCN numbers are below threshold, rotating with resistant and susceptible varieties can slow the increase in populations of SCN that can overcome common types of resistance available in commercial soybean cultivars. Cultural practices such as managing weeds, providing adequate fertility, amending soil pH to at least 6.5, and improving soil moisture through tillage and supplemental irrigation can reduce plant stress and help plants deal with SCN populations.

Sudden Death Syndrome (SDS): Symptoms of sudden death syndrome are expressed as yellowing and necrosis between the veins of leaflets. Veins of symptomatic leaves will remain green. Leaflets will eventually curl or shrivel and drop off with only the petiole remaining. Management of SDS includes a combination of strategies. Most importantly, SDS-resistant cultivars should be chosen whenever possible. If SDS and SCN are both problems in a field, choosing a variety with the best resistance/tolerance to both will be beneficial. Planting into cool, wet soils typically seen early in the season can favor infection by the SDS fungus. Delaying planting can reduce the risk of infection, but remember that yield loss will occur from delaying planting too long. Improving soil drainage and reducing compaction can help reduce levels of SDS. Crop rotation can be useful to manage other diseases of soybean; however, research has demonstrated that crop rotation does not significantly reduce levels of the SDS fungus in the soil. Even after several years of planting corn in a field, the SDS fungus can survive on corn plants and corn kernels can harbor the pathogen. In addition, the SDS fungus can survive in soil for long periods of time as specialized, thick-walled spores. For more information about SDS, consult the Wisconsin Farm Fact Sheet XGT1015 titled Sudden Death Syndrome of Soybean.

Cross Relationships: The relationship between these two diseases has been studied for almost 30 years and has yielded inconsistent results. Studies have shown positive associations between SCN and SDS foliar symptom development, where more severe SDS symptoms occur when SCN is present (McLean and Lawrence, 1993; Melgar et al., 1994; Roy et al., 1989; Sherm et al., 1998; Xing and Westphal, 2006). However, other studies report weak or no association between SDS symptom development in the presence of SCN (Gao et al., 2006; Roy et al., 1993; Sherm et al., 1998). The relationship between the actual presence of the SDS fungus in the soil as it relates the presence of SCN has been under-studied.

More research is needed to not only understand the relationship between SDS and SCN but also specifically between the two causal agents of these diseases. In WI, we have the unique opportunity to address this relationship. Until recently, the distribution of the SDS fungus throughout WI was not well understood, while the range of SCN was well documented in the state. We conducted a study to determine the presence of both causal agents, SCN and SDS fungus, from commercial soybean fields in WI and to determine if establishment of these two causal agents in production soybean fields is correlated.

Sample Collection Program: This study was possible through the checkoff-funded Wisconsin Soybean Marketing Board (WSMB) SCN soil testing program which offers free testing to WI growers. Soil samples that were voluntarily submitted during the 2011 and 2012 growing seasons were tested for SCN by wet-seiving methods and for the SDS fungus using DNA based detection methods.

WI Results: Sample submission totals are presented in table below for 2011 and 2012. In 2011, 56 of 135 (41.5%) samples were positive for SCN while 10 of 135 (7.4%) samples were positive for the SDS fungus. In 2012, 64 of 318 (20.1%) samples tested positive for SCN while 13 of 318 (4.1%) tested positive for the SDS fungus.

Wisconsin counties testing positive for SCN in 2011 and 2012 were representative of the confirmed SCN-positive region of the state. Soil samples where both SCN and the SDS fungus were found in the same sample occurred infrequently (data not shown), and counties where both SCN and the SDS fungus were found were not common. Our results also show the SDS fungus was found in counties farther west and north of the area where Bernstein and colleagues first found the pathogen.

Conclusions and Recommendations

Our study found a negative correlation between SCN and the SDS fungus, indicating that as the probability of finding the SDS fungus in a soil sample increases, the probability of finding SCN in the same soil sample decreases. As the odds of detecting the SDS fungus in soil approach 100%, the likelihood of finding SCN in Wisconsin soybean fields is estimated at just 60%. This negative correlation suggests that SCN and the SDS fungus do not rely on each other to colonize fields. Therefore, fields with heavy SCN pressure are not at greater risk for colonization by the SDS fungus. However, in the infrequent case where SCN and the SDS fungus do occur together, symptoms of disease and damage by both pathogens can be synergistic. Therefore, disease management practices for both pathogens should be implemented in these fields.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Aluminum Grain Trailers

Maurer Manufacturing offers a complete line of high quality aluminum grain trailers. Manufactured in Spencer, Iowa, Maurer aluminum grain trailers ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form