Strip tillage effects on soybean yields in Michigan

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Strip tillage is one of the conservation tillage options available for managing corn residue prior to planting soybeans. Interest in strip tillage is increasing because it offers the following benefits:

  • Reduced soil erosion compared to conventional tillage (when slopes are less than 5 percent).
  • Increased water infiltration compared to full-width tillage.
  • Faster and more uniform germination and emergence than other conservation tillage options due to increased soil warming in the spring.
  • Less soil moisture loss due to evaporation than chisel plowing followed by soil finishing.
  • Equal or better yields than no-till, vertical tillage and more intensive full-width tillage systems based on multiple-year data from Minnesota and North Dakota.
  • Reduced tillage costs by $6 per acre compared to a fall chisel operation followed by a spring soil finishing operation (2012 University of Minnesota figures).

This article summarizes the results from three Michigan on-farm research trials evaluating strip tillage effects on soybean yields. The strip tillage implement used in all three trials was a Dawn Pluribus set to operate on 30-inch centers. No fertilizer was applied during the strip tillage operations and all treatments were planted with a 30-inch no-till planter. Two of the trials were conducted near Niles, Mich., on coarse-textured soils. One of the trials was conducted in 2011 and the other in 2012. Each of these trials consisted of three treatments: fall strip tillage, spring strip tillage and an untilled control.

click image to zoom In 2011, the two strip tillage treatments produced significantly higher yields than the untilled control, but were not significantly different from each other (Table 1). In 2012, the spring strip tillage treatment produced a significantly higher yield than the fall treatment which was significantly higher than the yield for the untilled control. This was also true when both trials were combined and analyzed. The spring strip tillage treatment was also the most profitable, producing $16 more per acre than fall strip tillage and $33 more per acre than the untilled control.

The third strip tillage trial was conducted near Melvin, Mich., in 2012 and consisted of only two treatments: spring strip tillage and an untilled control. At this site, there was not a statistically significant difference between the yields produced by the strip tillage and the untilled control. The soil texture was much finer at this location. This trial was also the first time the producer operated the strip tillage tool. Like other tillage implements, proper adjustment and operation of strip tillage tools are essential to maximizing performance.

The results obtained from these three trials are consistent with results from trials conducted in Minnesota and North Dakota where soybeans grown in a strip tillage system were shown to yield equal to or better than those grown in no-till or conventional tillage systems. In these trials, the strip tillage operations were performed in the fall. The researchers recommend fall strip tillage over spring strip tillage due to improved soil warming and seed-to-soil contact. This may be more important on fine-textured soils than it is on the coarse-textured soils near Niles, Mich.

Based on the results from these trials, strip tillage looks promising for soybean production in 30-inch rows in Michigan. However, strip tillage should be restricted to fields having slopes less than 5 percent to reduce the potential for water erosion occurring in the rows.

Related MSU Extension article


Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Portable Conveyors

Convey-all portable conveyors are designed to handle your crops gently and efficiently. We offer an extensive line of high capacity ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form