Making P and K fertilizer recommendations

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Soil testing is the foundation upon which we make nutrient recommendations. Something equally important that is often overlooked is the crop response correlation work that gives those soil test numbers meaning. Together these two pieces are the essential components of making nutrient recommendations to maximize crop production and limit off site movement of nutrients that result in economic loss and potentially affect water quality. The Tri-State Fertilizer Recommendations used by The Ohio State University follows a build, maintenance and drawdown approach to soil fertility management.

The Tri-State Fertilizer Recommendation for both phosphorus and potassium are built around defining a critical level. The authors of the Tri-State define the Critical Level for both immobile nutrients as “…the soil test level above which the soil can supply adequate quantities of a nutrient to support optimum economic growth.” Below the Critical Level “… the soil is not able to provide P and K requirements of the crop.” Above the Critical Level “… the soil is capable of supplying the nutrient required by the crop and no response to fertilizer would be expected.”

The Maintenance Limit is the upper end of the scale.  The Tri-State authors define the Maintenance Limit as “There is no agronomic reason to apply nutrients when soil test levels are above the maintenance limit level.”

Soil test levels between the Critical Level and Maintenance Limit are define as the Maintenance Plateau Range. In this range, the recommendations are “Designed to replace nutrients lost each year through crop removal. No response to fertilizer in the year of application is expected. And no response to placement technique such as banding or stripping or the use of P and K starter fertilizer…”

click image to zoom Chart 1 show the Critical Level, Maintenance Limit and Maintenance Plateau for a 160 bushel corn crop and recommends fertilizer recommendation based on soil test level for 160 bushel corn.

Critical levels for phosphorus are defined in the Tristate Fertilizer Recommendations depending on crop. The critical P level for corn and soybean rotation is 15 ppm (30 pounds per acre) or if wheat and alfalfa are included in the rotation 25 ppm (50 pounds per acre). The Maintenance Limit for a corn and soybean rotation is 30 ppm (60 pounds per acre) or if wheat and alfalfa are included in the rotation 40 ppm (80 pounds per acre).

click image to zoom Critical levels and Maintenance Limits for potassium is defined in the Tri-state Fertilizer Recommendations based on CEC (Cation Exchange Capacity) of the soil and are shown in Table 1.

Three publications that can help farmers looking to develop fertilizer recommendations are:

The Fertilizer Recommendations for Corn, Soybeans, Wheat and Alfalfa can be found at  http://agcrops.osu.edu/specialists/fertility/fertility-fact-sheets-and-bulletins/tri_state_recs.pdf

Developing Phosphorus and Potassium Recommendations for Field Crops (AGF-515-12) walks through developing a nutrient recommendation and how much fertilizer is needed to meet that need found at http://agcrops.osu.edu/specialists/fertility/fertility-fact-sheets-and-bulletins/tri_state_recs.pdf

An Excel Spreadsheet to calculate P, K and Lime Recommendations (Beta Version-11/2012) for 7 fields or zones and a three crop rotation can be found at http://agcrops.osu.edu/specialists/fertility/fertility-fact-sheets-and-bulletins/TriState.xlsm  

Other helpful nutrient related publications can be found at http://agcrops.osu.edu/specialists/fertility/fertility-fact-sheets-and-bulletins


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Demco 1400 Grain Cart

Demco offers a 1400 bushel grain cart to provide unmatched efficiency and operator convenience. In addition to the large 1400 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form