Double crop soybeans in WI may be worth it

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


The Wisconsin winter wheat crop remains 3 weeks (developmentally) ahead of where we were at this time last year. If this progress continues we can realistically be cutting dry wheat in southern WI by July 1st. Couple that with Nov. CBOT soybean contracts at $12.81 (5/22/12) and though still risky we can start to pencil out a potential profit for WI growers to double crop soybeans in 2012.

The first two questions growers considering double crop soybean will likely ask are “What can be done to expedite wheat harvest” and “Can I apply glyphosate or some other desiccant to my winter wheat to aid in dry down?” First read the label of any product you intend to use to make sure the application is legal. If the product is labeled, read the application timing information and understand how to properly stage the wheat plant prior to application. Below is subsection taken from the Roundup WeatherMax label.

Preharvest (feed barley and wheat only)

USE INSTRUCTION: This product provides weed control when applied prior to harvest of feed barley and wheat. For feed barley, apply after the hard-dough stage and when the grain contains 20 percent moisture or less. For wheat, apply after the hard-dough stage of grain (30 percent or less grain moisture). Stubble may be grazed immediately after harvest.

PRECAUTIONS, RESTRICTIONS: Do not apply more than 22 fluid ounces of this product per acre. Allow 7 days between application and harvest or grazing. Preharvest application is not recommended for barley or wheat grown for seed, as a reduction in germination or vigor may occur.

In winter wheat, the timing for WeatherMax is hard dough (or 30 percent or less grain moisture). An application before this growth stage will not only be off label, it will likely reduce grain yield as the plant is prematurely killed. We do not want to sacrifice any wheat yield in hopes of gaining a few extra days for soybean. In terms of its effectiveness to aid in dry down, I have spoken with many colleagues across the country as well as Canada and the consensus is that the application will not greatly enhance dry down. As you note in the text from the WeatherMax label, the intent of the product is to provide weed control, not increase the rate of wheat drying.

An alternative to herbicide desiccation is to swath the wheat crop when the grain is still wet and let it dry in windrows. This option is risky because rainfall on swathed wheat can lead to sprouting in the head and raking a wet windrowed wheat crop can lead to large shatter losses. Also, an appropriate combine header is needed to harvest swathed crops.

The other option to expedite harvest is physically combine the wheat crop at a greater moisture content that we normally would. If a grower has access to a stripper header, winter wheat can be combined a few points wetter than with a conventional reel type head. Recognize that stripper headers decrease straw quality and if you are intending to sell the straw, then this must be factored into your decision.

The other factor to consider is the drying cost or dockage associated with harvesting and selling wet grain. Based on 2011 data the average dockage for moisture was $0.05 per bushel per point of moisture above 13.5% plus a factor for shrink. Also be aware that some elevators have an upper limit for grain moisture they will accept.

Once we have the wheat harvested we must consider the realistic yield potential of soybean planted in July for WI. An extensive planting date study was conducted in the early 1990s to quantify the effect of planting date and maturity group on soybean yield. Since full season maturity group soybeans were considered unrealistic for this late of planting only early and mid-group soybean cultivars were used.

click image to zoomFigure 1. Planting date effect on grain yield (bu per acre) of early to mid-maturity group soybeans (0.4 to 1.8 RM) in southern WI (Data from early 1990s planting date study). The average yield of a soybean planted on July 5th was 20 bushels per acre with a range of 9 to 33 bushels (Figure 1). The latest planting date in this study was July 12th which yielded 13.6 bu per acre (only one year data). For yield potential and harvestability, (a combine may not be able to pick up the lower pods) a grower should plant a mid-maturity group soybean (no earlier than 0.5 to 1.0 maturity group earlier than your full season soybean) instead of an ultra-early maturity group bean (0.5 or earlier).

To maximize yield potential in late planted soybean, growers should target a stand of 180,000 plants per acre in a drilled system. Wider row spacings and reduced plant stands will lead to reduced yield potential due to decreased canopy development. Planting too few seeds can also lead to a lower physical pod set and harvest issues. To achieve 180,000 plants per acre a grower may have to plant up to 200,000 seeds per acre (assuming 90% germ). It has been difficult to put forward a good “average” seeding cost as the farm gate prices for glyphosate tolerant untreated seed ranges from $30 to near $50 per unit. Add to that the broad range in seed treatment costs (seed treatments are discussed below) and seed costs can approach $60.00 per unit. If we assume 140,000 seeds per bag and 90% germ the input cost range for double crop soybean seed is $42.85 to $85.71. Couple this with the planting cost ($17.70 per acre; 2012 Iowa Custom Rate Guide), herbicide plus application ($12.00 per acre; Conley best guess), complete harvest ($40.15; 2012 Iowa Custom Rate Guide), fertilizer removal and “miscellaneous” costs the profit margin does significantly tighten, but still remains positive if we can hit the 20 bushel mark.

The biggest question on inputs that we have not addressed yet is seed treatments. I want to say right up front that I have little-to-no data in our conditions about the need for seed treatments in a WI doublecrop soybean system so I can only put forward my thought process and rationale.

1. Warm and unsaturated soil conditions will expedite soybean emergence and minimize pathogens so the need for a fungicide seed treatment will be greatly reduced.

2. Seed applied fungicides and insecticides are often partnered so if you do decide to use an insecticide a fungicide will likely be part of the mix.

3. Soybeans will be emerging as soybean aphid populations are increasing.

4. Seed applied insecticides have a ~35 day efficacy window (check individual product specs) which will provide protection into early August before any scouting is required.

5. Aphid feeding can be more injurious under water stress which these beans will likely be under so…..sans data an insecticide seed treatment may be warranted.

Lastly and undoubtedly the most important factor for double crop soybean profitability will be the environment. The two major environmental events to consider with double crop soybean are establishment and frost. It is likely that soil moisture will be depleted following a winter wheat crop and rainfall patterns in July are often spotty at best, therefore crop emergence and establishment may greatly be delayed if we need to wait on adequate moisture. Therefore no-tilling soybeans to conserve soil moisture and planting to moisture (assuming moisture is 2 inches or less) is important. If there is not adequate soil moisture and there is no rain in the forecast don’t plant. The second and perhaps more important environmental event is frost prior to physiological maturity. Individual soybeans that are not mature and are subjected to a significant frost event will remain green even if weather conditions warm.

Even if frost does not occur, a grower will likely harvest some green beans. The implications of these green beans are storage problems as well as significant dockage at the elevator. Please see Effect of Freezing on Soybean Seed Yield and Composition for more information.

2012 has already been a unique and challenging year for WI growers but if the wheat continues to progress at its current pace and we catch timely rains a real potential for profiting on double crop soybeans may exist.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Mobile Weather

Mobile Weather uses a third-party weather sensor connected to the Application Controller 1120 to display real-time weather information, including wind ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form