Collecting yield and identifying problem spots

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Soybean harvest is wrapping up and some fields beat all expectations and some indicate potential problem spots in the field.

As you think back to those questionable spots where the seed chatter through the combine got kind of quiet or you are scanning the yield monitor results, you have the best data for those low yield pockets. This year there could be several reasons, part due to the weather and part due to biotic factors like soybean cyst nematode.

Heavy rains that occurred shortly after planting affected stand in some parts of the state, while we did not have as much replanting as we have had in recent years – stands were an issue in some of the more poorly drained fields. Flooding, where the seed is submerged for more than 3 days, kills plants. Secondly, saturated soils for 24-48 hours give ample time for the water molds to attack soybean plants.

We saw several cases this summer, especially when varieties with low levels of partial resistance to P. sojae were planted. For flooding damage, it is time to revisit the drainage on that farm. For thin stands, it is time to focus more on the partial resistance (field resistance) for management of Phytophthora root and stem rot part of the variety package. Go back and see what seed treatment was used on that seed, and check the rate of the metalaxyl/mefenoxam portion of the seed treatment package.

SCN is here and is reaching some very high levels in some fields. In my own research plots, the trouble symptoms are plants that are half the height than the rest of the field and these cases were 2/3 the yield of the rest of the study. In other studies, we have no above ground symptoms and have less than half the yield.

From my two SCN colleagues here, Dr. Terry Niblack and Dr. Chris Taylor, they are picking up populations of SCN that can reproduce on the line PI 88788 which is the source of resistance in most of the soybean varieties. So – the first question is when was the last time you sampled that field? If it is greater than 10, it is probably time to do a check. The second question, how many years out of 5 have you planted soybeans?  If it is 4, it is really time to check. The third question for yield, did your field yield 10-15 bushels below the county/state yield/performance trial averages? It is really time to check.

Having pulled soil cores in Ohio soils before, it can be a back breaking task. So with the rain this week — since you will have a break from harvest — this week may provide an opportunity. Fall is the best, but I expect from all the corn that is still out there, there are some fields that soil sampling is just not going to happen until the spring.

The SCN is not going to go anywhere. With a hard winter the eggs that sit outside the cyst may get killed, which is why we have said fall is best.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Declining Weigh Blending System

Ranco Declining Weigh (DW) is the standard in fertilizer blending because of the speed and accuracy of the blending process. ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form