Bean leaf beetle pod feeding

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

click image to zoomBean leaf beetle and pod scarring. Soybeans, especially late-planted or late-maturing beans, should be monitored for bean leaf beetle feeding damage to pods. Pest managers have been noting bean leaf beetle feeding on foliage and are concerned about pods, especially with current prices. Bean leaf beetles scar the surface of pods, but only occasionally feed through the pod to the developing beans. During pod maturation, this scar may crack leaving an entry hole for plant pathogens that may cause discolored, moldy, shriveled, or diseased beans.

Pest managers would like to be able to predict whether economic damage will occur based on the numbers of beetles that are present and the stage of pod development (i.e., green, yellow, yellow-brown, or brown pods). Because the beetles are so mobile, there isn’t a correlation from leaf feeding to pod damage – one does not always lead to another. Part of the problem is that beetles may leave a senescing field for a neighboring one that is still green. The timing of harvest in relation to frosts also plays a role, although less so this year with early planting and harvest forecasts. Once the pods turn yellow to yellow-brown, they become less attractive and less susceptible to damage. Control is normally not warranted from this point on (see the following table).

click image to zoom Randomly select 2 plants in each of 5 areas of the field (minimum, more is better) and count the number of pods per plant and the number that show damage (10 total plants). Calculate the percentage of damaged pods per plant for the field as a whole. Note if the pods are green, beginning to turn yellow, or are yellow/brown.

At the same time, determine the number of beetles per sweep using an insect sweep net. Take 5 sets of 20 sweeps in the field. Determine the number of bean leaf beetles per sweep. Additionally, note whether beetles are still actively feeding while surveying the field.

Use the following table to determine when an insecticide treatment may be necessary. There are many compounds registered that will provide effective control of bean leaf beetle, but always remember to keep the pre-harvest interval in mind, many of these were listed in last week’s Pest&Crop. The original values of this table have been modified to reflect today’s higher commodity prices. These new, adjusted values are NOT time-tested, but certainly should be in the ballpark.

Erin Hodgson, Extension Entomologist at Iowa State University developed a dynamic calculator (Excel spreadsheet) which can be customized with commodity price and cost of treatment. It is based on beetles/sweep or row of foot. This too extrapolates from threshold data developed many years ago. You can download the calculator here: http://www.extension.iastate.edu/CropNews/2011/0815hodgson.htm.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Declining Weigh Blending System

Ranco Declining Weigh (DW) is the standard in fertilizer blending because of the speed and accuracy of the blending process. ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form