Spider mites respond to dry conditions, stressed beans

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

According to the U.S. Drought Monitor (<http://droughtmonitor.unl.edu/pics/in_dm.png>), as of June 12, 88% of Indiana is abnormally dry, with 39% of that in the first stages of drought. It should come as no surprise that two-spotted spider mites have just begun to move into and colonize thirsty soybeans. Iowa and Ohio have reported the same in their pest newsletters over the last week or so. Foliage damage from spider mite feeding is expressed initially as subtle stippling, which may progress to a bronzing and necrosis should dry conditions persist and mites are left unchecked. Bronzed foliage is irreversible, meaning the damage is done!

Before considering control, it is very important that spider mites are identified as the source of yellowish or bronzed plants in a field. Note that there are many other diseases, pathogens and nutrient deficiencies that cause a similar appearance of foliage. To confirm the presence of mites, shake some discolored soybean leaves over a white piece of paper. Watch for small dark specks moving about on the paper. Also look for very tiny, fine webbing on the undersides of the discolored leaves. Once spider mites have been positively identified in the damaged areas of the field, it is essential that the portions of the entire field be scouted to determine the range of infestation – spider mites are very patchy in colonizing fields – many times beginning at the borders. Sample in at least five different areas of the field and determine how far the spider mites have moved into the field from the grassy borders by using the “leaf-shake” method.

Mites are found in every field, every year. In most years they are held in check by a combination of predators, and the soybeans are healthy enough that mites are not able to build up populations to a high level. However, stressed plants actually provide a more nutritious feast for spider mites than healthy plants do, and in particular make amino acids available to the mites. This means protein, which is what mites use to make – you guessed it – more mites! Thus they thrive and quickly colonize large areas or fields where stress is more evident. Sandy, high clay, or compacted soils will exacerbate moisture stress in plants, with or without the presence of spider mites. Other stresses on soybean include pests such as soybean cyst nematode, root diseases, or nutritional imbalances, such as manganese deficiency. Obviously the best plant stress reliever under dry conditions is rain. Significant rain doesn’t control spider mites but helps the soybean plant become more vigorous and healthy. This, in turn makes the “juices” of the plant less nutritious to the mites, and makes mites less likely to reproduce as quickly.

The most severe damage occurs when the infestation starts in the early stages of plant growth and builds throughout the season (extended drought). Before applying controls carefully consider that, depending when damage is noted, multiple insecticide/miticide applications may be necessary. This is because surviving spider mites are able to repopulate a field much more quickly than their natural predators, which are usually also wiped out by these chemical applications. If leaf discoloration is apparent in multiple areas of the field, spider mites are positively identified as the culprit, and hot, dry conditions are expected to persist, it is recommended that a control be considered.

If a control is warranted, two pesticides are recommended for use. These include dimethoate (multiple generic formulations are available) and chlorpyrifos (Lorsban 4E and generics). Dimethoate is the most efficacious of these compounds for mite control. Neither of these products will control spider mite eggs, however, and each will provide a maximum of 7 days of residual activity. Proper placement of these pesticides is the key to successful control results. Nozzle pressures of 40 psi with fine to medium droplet size and 30-40 gallons of water per acre for ground application helps distribute the pesticide throughout the foliage. There are several products on the market with a combination of chlorpyrifos and synthetic pyrethroids. At this time we cannot recommend them, as field data for their efficacy for twospotted spider mites is limited. In general, do NOT use synthetic pyrethroid products when spider mites are present in fields, as they kill the natural predators and many perform poorly against mites.

 


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Truck and Trailer Mounted Tenders

Doyle’s Tenders are available in 8’, 10’, 16’, and 24’ lengths and include truck or trailer mounted with side or ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form