Soybean sudden death syndrome showing up

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


Soybean sudden death syndrome (SDS) caused by the root-rotting, soil-borne fungus Fusarium virguliforme, is beginning to show up in soybean fields across Kentucky. To my knowledge, all of the sightings are in patches of plants or individual plants, and are not field-wide. SDS has been seen in Kentucky each year, to one degree or another, since 1985.

Sometimes this this early symptom can look almost virus like. In most cases, blotches eventually coalesce and result in a yellow and brown discoloration between the veins, but the veins remain green. In severe cases, the leaflets will fall off, but the petioles will remain attached to the plant. Foliar symptoms are the result of a toxin produced by the fungus in diseased root tissue.

The foliar symptoms descibed above can look similar to stem canker, Dectes Stem Bore injury, and even pytotoxicity symptoms caused certain triazole fungicides, so foliar symptoms in and of themselves are not diagnostic for SDS. Additional symtoms include severely rotted roots (F. virguliforme is a root rot organism) and a light brown discoloration of the stem when sliced open with a knife. Healthy stems will appear a cream color.  When all three symptoms are evident, you can be quite confident that you have made a field diagnosis of SDS.

This disease is poorly named in that the disease does not usually suddenly appear, nor is the end result always death. In fact, SDS foliar symptoms first appear much like other diseases, a little at a time. It is only "sudden" if you have not been looking. I have seen plants with SDS recover (put out leaves without characteristic foliar symptoms) and in most cases, the disease comes in too late, or does not impact enough of a field, to significantly reduce yields. Severe foliar symptoms can be misleading and often do not indicate that the disease has or will significantly impact yields. In fact, I have seen many instances over the last 27 years where severe foliar symptoms developed across a field (late), but the yield retieved was a record for the field. So with SDS, when symptoms show up relative to crop stage is everything.

Fusarium virguliforme infects roots early in the season and foliar symptoms normally appear in the reproductive stages, as is the case in fields this year. Abundant soil mositure encourages SDS and that is why we are seeing more of the disease this year than we normally do.  In a more typical year, a greater extent of SDS is often associated with very early planting; doublecrop beans are rarely affected. However, in a year like this one, planting date associations are blurred and we may find that the disease even ends up developing in doublecrop soybeans.

The best way to control SDS is to plant a resistant variety. They are not that hard to come by. But there is nothing you can do to slow or stop SDS once it is evident in a field. For sure, applying a fungicide WILL NOT HELP.

In summary, SDS often has a "bark" more hurtful than its "bite".  Twenty-seven years of experience in Kentucky has shown that people often get all worked up over SDS because of the hyped-up name for the disease and because symptoms usually show up late in the season in an otherwise good looking crop. However, the end result is commonly little or no measureable yield loss, unless the disease is widespread and severe in a field before pod fill is complete, which is rare in Kentucky.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Field Profit Planner Dashboard

With GEOSYS Field Profit Planner, you can plan for the future using information from previous years. Agronomic decisions made during ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form