Evaluation of foliar fungicides, insecticides on soybean

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

click image to zoom Iowa State University personnel assessed foliar fungicide and insecticide use on soybeans at seven locations across Iowa (Fig. 1) including the Northwest Farm (Sutherland), Northern Farm (Kanawha), Northeast Farm (Nashua), Curtiss Farm (Ames), Armstrong Farm (Lewis), McNay Farm (Chariton) and Southeast Farm (Crawfordsville).

Materials and methods

The experimental design at each location was a randomized complete block with four replications. Details on variety and date of planting, pesticide application and harvest are listed in Table 1. Fungicides and insecticides were applied with a self-propelled research sprayer (Fig. 2) at growth stage R3 (beginning pod) at all seven locations unless otherwise noted. Disease was assessed when soybeans were at the R6 (full seed) growth stage.

click image to zoom Diseases found included Septoria leaf blight (brown spot) in the lower canopy and small amounts of downy mildew and soybean vein necrosis virus in the upper canopy. Only diseases that had more than 1 percent severity were analyzed and included in this report. Although soybean aphid populations were observed between R3 and R6, none of the seven locations reached threshold. Thus, an IPM insecticide treatment for soybean aphid was never applied. Total seed weight per plot and seed moisture were measured with a 2009 Almaco SPC20 research plot combine. Seed weight was adjusted to 13 percent moisture and yield was calculated. click image to zoom

Results

This growing season had less than average rainfall, similar to 2012. Figure 3 shows drought conditions in the United States in early August. While it was abnormally dry across much of Iowa, there were parts that did catch timely rains, especially in the northeast portion of the state.

click image to zoom The dry weather conditions contributed to lack of foliar disease development at any location. The only fungal disease with more than 1 percent severity in the plots was Septoria brown. This low level of disease was not severe enough to affect yield at any location. Soybean vein necrosis virus and soybean green stem syndrome were also identified at several locations.

The majority of fungicide and insecticide treatments had minimal or no effect on seed moisture.

click image to zoom Yield averaged between 45.4 – 71.7 bu/A across locations. Yield response to fungicide, insecticide and fungicide plus insecticide application was minimal at all locations. There were both negative and positive responses to various treatments at some locations, but nothing consistent over the seven locations (Fig. 4). The average yield response for all fungicides across all locations was 0.6 bu/A. The average yield response by chemical family is reported in Figure 5. SkyRaider™ insecticide alone averaged 2.6 bu/A greater than the untreated control and was the only stand-alone insecticide in the trial. We did not see an additive effect for fungicide + insecticide as yield response for these treatments averaged 2.2 bu/A greater than the untreated control across all seven locations. click image to zoom

 


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


High Capacity Roller Belt Conveyors

These high capacity units feature a lagged drive roller, troughing idlers, rubber disc return rollers, and an automatic belt tensioning ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form