Seeding winter wheat late and thickening stands

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

click image to zoomRobert KleinFigures 2-4. High winds with gusts up to 70 mph swept across western Nebraska Oct. 18, stripping corn ears and damaging wheat seedlings in this field in western Keith County. This fall many winter wheat fields may not have sufficient stands for profitable production due to the lack of soil moisture or damage from high winds that swept across the state Oct. 18.

If you are evaluating your fields, consider this guide: If the stand is fairly uniform and is about the population you would expect from a seeding rate of 30 lb /ac of average size seed (about 15,000 seeds/lb), it is probably best to leave the stand as is. (See the NebGuide Estimating Winter Wheat Yields, G1429, for more information.) If the stand is not uniform or less than what you would expect from a seeding rate of 30 lb/ac, you may want to thicken up the stand or reseed the field. click image to zoom

In determining how to proceed with your winter wheat, consider:

  • Seed or reseed as soon as possible. To reduce wind erosion problems before crop establishment, consider using a hoe-type opener with drill spacing of at least 10 inches. This will help create surface clods and ridges.
  • Robert KleinWinter wheat was silted under to the depth of the knife in this field. Adjust your normal seeding rate. If seeding winter wheat now or in the near future in dryland, use 90 lb/acre of average size seed. In eastern Nebraska and in irrigated fields, increase the rate to 120 lb/acre of average size seed. Increase the seeding rate for large seed or decrease for small seed by the appropriate amount.
  • Apply 15 to 20 lb/ac of phosphorus (starter fertilizer) with the seed, regardless of phosphorus levels in the soil. If you don’t have fertilizer equipment on the seeder, ask your fertilizer dealer to mix 11-52-0 or 18-46-0 with the seed. We prefer 11-52-0. Most fertilizer dealers are able to do a good job of mixing fertilizer and wheat seed. If you have liquid fertilizer equipment on your seeder, use 10-34-0. Do not include 12-0-0-26 as it will reduce germination.
  • Seed at least 1 to 1.5 inches deep, making sure the seed is well covered. If you cannot place the seed close to 1 inch deep, you may want to delay seeding until you can seed at the desired depth. Shallow seeding depth can result in winter injury (crown and root rot).

Winter wheat seeded late can survive the winter in most cases if there is enough warm weather for the wheat to develop a couple of tillers and a secondary root system.

Resources

For more information, see these UNL Extension publications:

  • Seeding Rates for Winter Wheat in Nebraska, G2056, reviews winter wheat trials in Nebraska and shows how widely the number of seeds per pound can vary within and among varieties. This led to the recommendation to plant according to seeds per acre rather than pounds per acre.
  • Wind Erosion and Its Control, G1537, discusses the process through which wind erodes soil and steps growers can take to reduce potential damage.
  • Emergency Wind Erosion Control, G2006, covers temporary techniques for emergency wind erosion control to protect young seedlings.
  • Estimating Winter Wheat Grain Yields, G1429, describes three methods for estimating winter wheat grain yields at different points in the season.
  • Wheat section of CropWatch

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Pacesetter Grain Hopper

The Pacesetter Gain Hopper features original and innovative ideas like the patented RollerTrap™, the industry’s easiest to open and maintain trap ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form