Recommended adjustments for delayed wheat planting

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

How can you compensate for yield loss from delayed winter wheat planting due to recent rain in the Nebraska Panhandle?

click image to zoomFigure 1. Washed out field near the UNL High Plains Ag Lab near Sidney. After being dry much of the summer, areas of the Panhandle received as much as 8 inches of rain in the last three weeks, leaving fields too wet to plant during the optimum period for winter wheat. For some fields this will be the third planting. The Nebraska Panhandle has experienced patchy but heavy rain in the past two to three weeks. For example, the High Plains Ag Lab near Sidney received 8 inches of rain the last three weeks of September. The situation was similar in other parts of the southern and northern Panhandle. The last storm dropped nearly 3 inches of rain in one day in the Alliance area. Some fields are too wet to plant within the optimum seeding dates (Figure 1). A few wheat fields, which were already planted, may have to be replanted due to erosion in the fields. The rain has also delayed dry bean harvest, which indirectly pushes irrigated wheat planting back.

click image to zoomFigure 2. Recommended seeding dates for Nebraska winter wheat. How late can you plant winter wheat?

Several factors determine optimum planting dates. In the Panhandle the dates depend on elevation. Producers can determine the ideal date for each field by knowing the elevation. Using a starting point of September 15 for 3,500 feet, add one day for each 100-foot decrease and subtract one day for each 100-foot increase in elevation. The map (Figure 2) is a guide rather than an absolute deadline. Each producer should make changes to ensure the planting dates fit the conditions of his or her farm.

What will be the yield loss?

In the Panhandle the yield loss due to delayed planting can be 5-20% depending on how late it was planted. (For more information see NebGuide 2211, Planting Winter Wheat in Dry Soil.)

What adjustments can be made in order to compensate for yield loss?

One or more of the following steps can be used to compensate for most of the yield losses:

  • Use narrow row spacings. A 5-8 inch row spacing is suggested over a 10-15 inch spacing. If you use a wider spacing, increase seeding rate by 1.5 times.
  • Increase the seeding rate to:

— 10-15 lb (150,000-225,000 seeds) for dryland (non-irrigated) winter wheat and
— 15-20 lb (225,000-300,000 seeds) for irrigated

click image to zoom per acre for each week after the optimum date for your farm (based on elevation). If no-till seeding into row crop stubble more than one week later than the optimum seeding date, the seeding rate should be 90-120 lb (1,350,000-1,800,000 seeds) per acre. Optimum seeding rate is 18 plants per foot of row for dryland (10- to 14-inch row spacing) and irrigated (6- to 8-inch row spacing). Optimum seeding rates for the Panhandle range from 600,000 to 900,000 viable seeds per acre for dryland and 1,000,000 to 2,500,000 viable seeds per acre for irrigated, which will be in ranges of 30-60 lb and 90-180 lb per acre, respectively, depending on seed weight and germination percent. Total seeds per acre are more critical than the pounds per acre. Therefore, calculate seeding rate in pounds per acre based on seed weight, row spacing, and germination percent of the seed lot. Use Tables 1 and 2 as guides to estimate seeding rate. (See details in NebGuide G2211.)

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Aluminum Grain Trailers

Maurer Manufacturing offers a complete line of high quality aluminum grain trailers. Manufactured in Spencer, Iowa, Maurer aluminum grain trailers ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form