Unpredictable soybean response to starter fertilizer

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

click image to zoom Starter fertilizers (2x2 and in-furrow) have produced mixed results in SMaRT (Soybean Management and Research Technology) on-farm trials. In-furrow fertilizer increased soybean yields in two of 11 trials and decreased yields at one location. Starter fertilizer placed in a 2x2 band increased soybean yields in one of three trials and decreased yields at one of the sites. This article will focus on the three trials that showed a yield increase from starter fertilizer to identify any commonalities that might help predict when starter fertilizer will increase soybean yields.

click image to zoom The information presented in Table 2 shows the analysis, application rate and application method for the fertilizers applied at the three responsive sites. This information shows that yield increases can be obtained from both fluid and dry fertilizers and in-furrow and 2x2 placement methods. Soybeans are more sensitive to salt injury than corn so in-furrow fertilizer use on soybeans requires extra caution. Michigan State University Extension recommends the 2x2 placement method as it provides a greater level of crop safety.

click image to zoom The potential for a positive yield response from starter fertilizer is predicted to increase when phosphorus (P) and potassium (K) soil test levels are below the critical levels for these nutrients and when planting into cool, wet soils. The soil test P and K levels for each of the responsive sites are listed in Table 3. All P and K soil test levels were above the critical levels except the Allegan location where the K level was below the critical level of 97 ppm. So, existing P and K soil test levels were not good predictors of the starter fertilizer yield response at these sites.

Three factors generally lead to lower soil temperatures: 1) early planting dates; 2) no-tillage or high residue cover; and 3) fine-textured soils. This information is provided in Table 3. None of the fields were planted early, two of the fields were tilled and had low residue cover and none of the sites had fine-textured soils. Again, there were no consistent factors that could be identified to explain the positive yield response from starter fertilizer at these sites.  

Unfortunately, there doesn’t appear to be any common factors that can be identified from these locations for predicting when starter fertilizer will increase soybean yields. However, these sites do not disprove or refute the general consensus that a positive response to starter fertilizer is more likely when P and K soil test levels are below the critical levels and when planting into cool, wet soil conditions.

This article was produced by the SMaRT project (Soybean Management and Research Technology). The SMaRT project was developed to help Michigan producers increase soybean yields and farm profitability. The SMaRT project is a partnership between MSU Extension and the Michigan Soybean Checkoff program.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form