Studies show biosolids can boost soil P levels

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


Treated wastewater solids called biosolids are sometimes used by farmers to boost soil nutrient levels. Now research by a USDA scientist provides new information about how long those plant nutrients remain after biosolids have been applied to the soil.

This work was conducted by Agricultural Research Service (ARS) agronomist Eton Codling, and supports the USDA priority of promoting international food security. ARS is USDA's chief intramural scientific research agency.

Biosolids used in agricultural production have been processed to kill pathogens, and their use is strictly regulated to ensure that the materials don't harm the environment, human health or animal health. Farmers who follow pre- and post-application management regulations can obtain permits to apply biosolids to fields where food and feed crops are grown.

Codling measured mineral levels in three different soils that had received a single amendment from a biosolid processed either via high heat, additions of lime, anaerobic digestion, or air drying. The amendments, which were applied at several different rates to the soils, had taken place from 16 to 24 years earlier during previous studies on biosolids. As part of the earlier work, the fields had been cropped after the biosolids had been added, so the biosolid nutrients in the experimental fields had been available for crop uptake for at least 16 years before Codling began his research.

Codling observed that phosphorus levels were generally higher in the biosolid-amended soils than in soils that didn't receive the amendments. This strongly indicated that soluble phosphorus levels in biosolid-amended soils could exceed typical plant requirements for years after biosolids were added.

Codling, who works at the ARS Environmental Management and Byproduct Utilization Laboratory in Beltsville, Md., also noted that phosphorus solubility varied with the biosolid type and application level.

Read more about this research in the January 2013 issue of Agricultural Research magazine.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


SST Imagery Services

In conjunction with third-party imagery partners, SST Summit Professional users will soon be able to order imagery products on-demand. SST ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form