Addressing mid-season fertility issues

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

As the crop progresses, some nutritional problems often become more evident to farmers. Here are a few to consider.

For nitrogen (N), if sidedressing corn has not occurred, the PSNT or chlorophyll meter can still be used to assess the N status in fields just before maximum crop demand. These tests are most useful on fields with manure to determine if the manure is supplying adequate N or if additional sidedress N is necessary.

Research has shown that the accuracy of sidedress recommendations are improved dramatically with these tests compare to just following standard N recommendations. See Agronomy Facts 17, Presidedress Soil Nitrate Test for Corn for details on the PSNT or Agronomy Facts 53 The Early Season Chlorophyll Meter Test for Corn for details on the using the chlorophyll meter. It is critical with both of these tests that the instructions be followed exactly for the results to be valid. If an N deficiency is detected beyond normal sidedress time, if equipment is available to apply N in the taller crop, rescue applications of N can be very helpful, up until around tasseling time.

There have been a few reports of potassium (K) deficiency. With regular soil testing these can usually be avoided. It is important to remember that forage crops remove very large amounts of K from the soil which can deplete the soil rapidly. Thus, maintaining K with regular manure or fertilizer applications based on soil tests is critical. Also, realize that while K deficiency in plants is often due to soil K deficiency, other factors like soil compaction can also result in a plant K deficiency even in a soil with adequate K.

A common question this time of year with K deficiency is whether it will help to apply K now to growing corn. If the corn is not too tall to broadcast K fertilizer, there is a good chance that adding K will help the crop recover at least some from the deficiency. Besides, if the soil is deficient, a K application is necessary at some point anyway, so applying it to the growing crop may help that crop. But regardless, it will begin building up the soil K for the future.

Before making a K application, run a soil test to make sure the deficiency in the crop is due to low soil K and not some other soil limitation. Applying K to a soil already adequate in K but limited by some other soil factor will be of no help.

As we might expect, there has been some sulfur (S) deficiency observed on corn this year. This has strictly been on cash crop farms without manure so far. At this point, if sidedressing has not yet occurred adding ammonium thiosulfate (ATS) to UAN for sidedressing is an easy way to add some sulfur to fields that have been determined to be S deficient. A common fertilizer with UAN and ATS is 28-0-0-5S. For every 10 gal of UAN applied per acre you will get 5.4 lb S/A.

For smaller corn, ammonium sulfate could be broadcast over the crop. A rate of 100 lb ammonium sulfate/A will supply 24 lb S/A. Ammonium sulfate will cause some burning but the benefit will usually outweigh any injury effects.

Either way, applying 15-25 lb S/A would be a typical rate. Remember that soil testing for S is not very reliable. Plant tissue testing is a better tool for diagnosing S deficiency.

Plant analysis is a valuable tool for monitoring crop nutrition and diagnosing suspected plant nutrient deficiency problems. There are two ways to use plant analysis. The first method is to compare the analysis of the plant tissue with standard tables of interpretive values. Since the table values are for specific plant parts sampled at a specific stage of growth, it is critical that sampling guidelines be strictly followed. Information on sampling crops and plant analysis interpretation levels are available on the Penn State Agricultural Analytical Services Lab web site.

When a problem is observed, analysis of plants from the problem area and a nearby normal area, along with soil tests from both areas, can be very useful in diagnosing nutritional problems and determining if they are related to soil nutrient deficiency or some other soil or plant factor affecting nutrient uptake. The same plant part should be sampled in both the good and bad areas to make valid comparisons.


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


X-TENDED REACH GRAIN CARTS

YOUR BEST HARVEST IS NOW WITHIN REACH J&M introduces their patented line of X-tended Reach grain carts, featuring a frontfolding single ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form