Wheat: Is it too early to apply nitrogen?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Each year producers ask the question when is the best time to apply N to wheat? Also, is it ok to apply N on frozen ground?

For any N application the question to ask is when does the crop need N. Wheat does not require large amounts of N until stem elongation (Feekes Growth Stage 6), which is the middle or the end of April depending on the location in state. Ohio research has shown no yield benefit from applications made prior to this time period. Soil organic matter or N applied at planting generally provides sufficient N for early growth until stem elongation.

Nitrogen applied prior to rapid utilization has the potential to be lost and unavailable for the crop. Nitrogen source will also affect the potential for loss. Urea-ammonium nitrate (28%) has the greatest potential for loss, ammonium sulfate the least, and urea would be somewhere between the two other sources.

Ohio research has shown yield losses from N applied prior to green-up regardless of the N source. The level of loss depends on the year.  There has never been a yield increase from applications made prior to green-up compared to green-up or Feekes Growth Stage 6 applications.

However, there is a legitimate concern that wet weather may prevent application of N at early stem elongation. Ohio research has shown a yield decrease may occur when N application is delayed until Feekes Growth Stage 9 (early boot). Thus a practical compromise is to topdress N any time fields are suitable for application after initial greenup to early stem elongation.

There is still a potential for loss even at green-up applications. To lessen this risk a producer may want to use a N source that has the least potential for loss for earlier applications. The source of N is not as critical as the application date approaches stem elongation.

In summary, a producer may get away with applying N prior to green-up on wheat. However, university data has not shown a yield advantage for these early applications, but results have shown in certain years a major N loss and yield reduction from applications prior to green-up.

Why take the risk, just wait until green-up; the wheat does not need most of the N until April and May anyway.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Fertilizer Conveying Systems

Waconia Manufacturing routinely designs receiving systems for volume requirements from 60 to 1,500 TPH. All receiving systems are fabricated with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form