Weighing the value of spring vs. fall nitrogen

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

As corn harvest is concluding in Nebraska, many farmers are turning their thoughts to preparing for next year’s crop. One thought is on how to best apply nitrogen (N) fertilizers to maximize N use efficiency and corn yields. Nitrogen fertilizers can be applied at many times throughout the year including; fall, spring, preplant, at planting, sidedress, or through fertigation. When deciding when and how to apply N fertilizers, consider the 4Rs of nutrient management:

  • right time of application,
  • right fertilizer type,
  • right placement, and
  • right application rate.

Fall vs. Spring Applications

Generally UNL does not recommend fall N fertilizer applications in corn. Research has shown that fall applications of N fertilizer are less efficient than applications during the growing season. Corn uses N more efficiently when applied as close as possible to when the plant needs it. Nitrogen is very mobile and easily lost from the soil through leaching and denitrification. A significant quantity of N applied in the fall can be lost throughout the winter and spring, significantly reducing potential plant use.

This is the first fall in several years when we are entering winter with good stored soil moisture across much of the state. With normal precipitation this winter and early spring, the risks of leaching and denitrificaion increase. When deciding whether to apply N in the fall, weigh the time savings of fall applications when field work is limited with the cost of extra N that will be needed and the increased uncertainty about how much will be available next year for plant use.

If you are planning fall N application, consider these factors:

  • Apply anhydrous ammonia because it’s not initially leachable.
  • Apply after soil temperatures are below 50°F. (Check CropWatch Soil Temperatures for your area.)
  • Because of the potential for N loss, UNL N recommendations for corn are increased by 5% when applied in the fall.
  • Fall applications of nitrate (NO3) forms of N are discouraged due to substantial risk of leaching and denitrification.
  • Fall N applications are not advisable on sandy or other easily leachable soils, or where ponds or surface drainage is delayed.
  • Nitrification inhibitors help reduce the potential for loss through leaching or denitrification, but are less effective with fall than with spring application.

Growing Season Application Considerations

Multiple (or split) applications of N are generally more efficient than single large doses (especially on sandy soils) due to N loss potential. Also, crops use N more efficiently when it is placed beneath the soil surface. Broadcasting N on the soil surface increases the likelihood that some N will be lost due to ammonia volatilization or runoff. This is one reason why anhydrous ammonia, which must be injected, sometimes appears to be a better N source than urea or UAN solution, which often are surface applied. In general, as long as N fertilizers are correctly applied, all are agronomically equal. Fertigation is efficient if it’s timely and if application rates are not excessive. Irrigation or rainfall soon after the application of urea fertilizers significantly reduces the potential for ammonia loss. The use of urease inhibitors with surface-applied urea fertilizers reduces the potential for ammonia loss.

Soil Sampling and N Credits

Efficient N fertilizer use requires that the producer gives proper credit for N sources already present before selecting the appropriate N application rate. Significant sources of N include

  • soil residual nitrate (determined by soil sampling),
  • manure and organic materials (determined by sample analysis),
  • legumes (determined according to the previous crop), and
  • irrigation water (determined by irrigation water sampling).

Actual N credits from these sources can vary widely, but in many cases the N fertilizer rate can be reduced significantly after accounting for these credits.

Accounting for residual soil nitrate-N has become especially important due to recent weather patterns. Drought conditions can have a significant impact on how much N is left in the soil after harvest. The only way to determine the availability of residual soil nitrate-N is through soil sampling.

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (1) Leave a comment 

e-Mail (required)


characters left

USA  |  November, 15, 2013 at 02:26 PM

Why not use a slow release nitrogen like Trizone (N-Sure) that will not leach and gives 8-10 weeks of nitrogen release when temperatures are >55F.


Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form