Scientists creating plants that make their own fertilizer

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Since the dawn of agriculture people have exercised great ingenuity to pump more nitrogen into crop fields. Farmers have planted legumes and plowed the entire crop under, strewn night soil or manure on the fields, shipped in bat dung from islands in the Pacific or saltpeter from Chilean mines and plowed in glistening granules of synthetic fertilizer made in chemical plants.

No wonder Himadri Pakrasi’s team is excited by the project they are undertaking. If they succeed, the chemical apparatus for nitrogen fixation will be miniaturized, automated and relocated within the plant so that nitrogen is available when it is needed and where it is needed and only then and there.

“That would really revolutionize agriculture,” says Pakrasi, Ph.D., the Myron and Sonya Glassberg/Albert and Blanche Greensfelder Distinguished University Professor and Director of the International Center for Advanced Renewable Energy and Sustainability (I-CARES) at Washington University in St. Louis.

Engineering with biological parts
Much of modern agriculture relies on biologically available nitrogenous compounds (called “fixed” nitrogen) made by an industrial process, developed by German chemist Fritz Haber in 1909. The importance of the Haber-Bosch process, as it was eventually called, can hardly be overstated; today the fertilizer it produces allows us to feed a population roughly a third larger than the planet could sustain without synthetic fertilizer.

On the other hand, the Haber-Bosch process is energy intensive, and the reactive nitrogen released into the atmosphere and water as run-off from agricultural fields causes a host of problems, including respiratory illness, cancer, and cardiac disease.

Pakrasi thinks it should be possible to design a better nitrogen-fixing system. His idea is to put the apparatus for fixing nitrogen in plant cells, the same cells that hold the apparatus for capturing the energy in sunlight.

The National Science Foundation recently awarded Pakrasi and his team more than $2.3 million to explore this idea farther. The grant will be administered out of I-CARES, a university-wide center that supports collaborative research regionally, nationally, and internationally in the areas of energy, the environment, and sustainability.

This award is one of four funded by the National Science Foundation jointly with awards funded by the Biotechnology and Biological Sciences Research Council in the United Kingdom. The teams will collaborate with one another and meet regularly to share progress and successes.

A proof of principle
As a proof of principle Pakrasi and his colleagues plan to develop the synthetic biology tools needed to excise the nitrogen fixation system in one species of cyanobacterium (a phylum of green bacteria formerly considered to be algae) and paste it into a second cyanobacterium that does not fix nitrogen.

The team includes: Tae Seok Moon, PhD, and Fuzhong Zhang, PhD, both assistant professors of energy, environmental and chemical engineering in the School of Engineering at Washington University, and Costas D. Maranas, Donald B. Broughton Professor in the Chemical Engineering Department at Pennsylvania State University.

“Ultimately what we want to do is take this entire nitrogen-fixation apparatus—which evolved once and only once—and put it in plants,” Pakrasi says. “Because of the energy requirements of nitrogen fixation we want to put it in chloroplasts, because that’s where the energy-storing ATP molecules are produced.” In effect, the goal is to convert all crop plants, not just the legumes, into nitrogen fixers.

Amazing cycling chemistry
All cyanobacteria photosynthesize, storing the energy of sunlight temporarily in ATP molecules and eventually in carbon-based molecules, but only some of them fix nitrogen. Studies of the evolutionary history of 49 strains of cyanobacteria suggest that their common ancestor was capable of fixing nitrogen and that this ability was then repeatedly lost over the course of evolution.

The big hurdle to redesigning nitrogen fixation, however, is that photosynthesis and nitrogen fixation are incompatible processes. Photosynthesis produces oxygen as a byproduct and oxygen is toxic to nitrogenase, the enzyme needed to fix nitrogen. This is why most organisms that fix nitrogen work in an anaerobic (oxygenless) environment.

Cyanobacteria that both photosynthesize and fix nitrogen separate the two activities either in space or in time. Cyanothece 51142, a cyanobacterium Pakrasi’s lab has studied for more than 10 years, does it through timing.

Cyanothece 51142 has a biological clock that allows it to photosynthesize during the day and fix nitrogen at night. During the day the cells photosynthesize as fast as they can, storing the carbon molecules they create in granules. Then, during the night, they burn the carbon molecules as fast as they can. This uses up all the oxygen in the cell, creating the anaerobic conditions needed for nitrogen fixation.

Thus the environment within the cell oscillates daily between the aerobic conditions needed for capturing the energy in sunlight and the anaerobic conditions needed for fixing nitrogen.


A single mega transfer
The scientists have chosen their proof-of-principle project very carefully to maximize the odds it will work.

Cyanothece 51142 is particularly attractive as a parts source for the project because it has the largest contiguous cluster of genes related to nitrogen fixation of any cyanobacterium. Roughly 30 genes are part of the same functional unit under the control of a single operating signal, or promoter.

The scientists hope this cluster of genes can be moved to another cyanobacterial strain in a single mega-transfer. The one they’ve picked as the host, Synechocystis 6803, is the best studied strain of cyanobacteria. Not only has its genome been sequenced, it is naturally “transformable” and able to integrate foreign DNA into its genome by swapping it with similar native strands of DNA.

But it’s actually the next step in the project that will provide the greater challenge for Pakrasi and his team. The scientists will need to figure out how to connect the transplanted nitrogen-fixing gene cluster to Synechocystis’ clock. “Like every cyanobacterium,” Pakrasi says, “ Synechocystis has a diurnal rhythm. But how to tap into that rhythm we don’t know yet. We have some ideas we’re going to test, but that’s where the challenge lies.”

Overcoming the challenge of sustainably producing food for a world population of more than 7 billion while reducing pollution and greenhouse gases will require more than luck. Odds are it will take a daring, “out of the box” idea like this one.




Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (3) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

ali    
Tehran  |  August, 23, 2013 at 01:20 PM

It is a revolution .

k s sandhu    
india  |  August, 26, 2013 at 10:14 PM

This is very very appreciable idea and if we are successful in our mission it will bring revolution in agriculture and allied fields.Best of luck.

Margaret Krefting    
usa  |  December, 01, 2013 at 10:59 AM

mushrooms


Direct Drive Rotary Blender

The Doyle 8, 10, 13, & 16 ton Direct Drive Rotary Blender’s are the industry’s fastest rotary blenders. These units ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form