Nitrogen loss - spring 2013

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Dry soils across Iowa from deficit precipitation following the drought in 2012 have changed to excess wetness this spring. Unfortunately, precipitation to replenish subsoil moisture has been much more than needed. As I wrote in an ICM News article earlier this spring, one downside to the excess precipitation has been movement of carryover nitrate deeper into the profile and to tile lines, resulting in high nitrate-N concentrations in surface waters. This means there is less nitrate-N carryover to be utilized by 2013 crops, although as noted in the previous article, not all of the carryover N moved below the three-foot depth.

As in past wet springs, excess wetness can lead to loss of N applied for the current corn crop and result in greater than normal N response. I wrote several ICM News articles in the spring of 2008 and 2011 covering several aspects about N transformations in soil and N loss potential, and estimating the need for additional N application. Links to those articles are listed here.

www.extension.iastate.edu/CropNews/2013/0604Sawyer.htm
www.extension.iastate.edu/CropNews/2011/0613sawyer4.htm
www.extension.iastate.edu/CropNews/2011/0613sawyer3.htm
www.extension.iastate.edu/CropNews/2011/0613sawyer2.htm
www.extension.iastate.edu/CropNews/2011/0613sawyer1.htm

A web-based program to estimate sidedress N application for corn, called Adapt-N, is currently being promoted across the Corn Belt. It was developed at Cornell University in New York and is a combination of models that simulate soil N processes, influence of precipitation and corn N uptake. It has also recently been promoted as a way to estimate N losses from fall applied N. My evaluation the last three years indicates the program consistently and significantly underestimates needed N application (compared to economic optimal N rates at response trials). This brings into question if the program has been adequately calibrated and tested with Midwest conditions. If you try the program this spring, be cautious and consider use on only a limited trial basis.

The spring this year has been cold. Nitrification and denitrification are slow in cold soils, which will decrease potential for loss of applied N. But cold temperatures will not slow leaching of nitrate present in the soil. With slow conversion of ammonium to nitrate, there should be less loss of applied N – especially for recently applied ammonium fertilizers, such as anhydrous ammonia. Nitrification will also be less for applications such as late fall applied anhydrous ammonia and inclusion of a nitrification inhibitor. Early fall applied N, such as liquid manure, would have significant conversion to nitrate last fall. The nitrate component of UAN solution (28 or 32 percent N) is immediately subject to loss, and the nitrification rate of urea and ammonium in UAN will be more rapid than anhydrous ammonia. Therefore, loss potential is greater with such applications.

An aspect of this spring that is somewhat different from past wet springs is the late corn planting and slow growth. From my observations in north central Iowa, the corn crop at this time is the smallest I remember in the 2000s. Corn N demand has been very low so far, and for late planted fields, season-long demand may be less due to lower productivity.

When warm, wet soils provide a good environment for microbial mineralization, the conversion of organic N to ammonium. Ammonium will accumulate under anaerobic conditions. While corn may die in ponded field areas, if replanted, the accumulated ammonium will supply crop-available N and perhaps an amount adequate to meet crop needs.

For corn fields with intended sidedress or split/sidedress N application, major loss conditions this spring have been avoided. For fields that had fall or early spring N applied, a visual way to check if corn will respond to additional N is to apply sidedress N fertilizer strips as soon as possible across several fields and watch the corn response. This can give a visual clue to potential for more N need and provide reference areas for mid-vegetative stage crop greenness measurement or canopy sensing.


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Speed King Honeycomb BeltVeyors

CrustBuster/SPEED KING Inc. has a full line up of Honeycomb style BeltVeyors that offer high capacity, greater discharge height with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form