Nitrogen crediting for fields with cover crops

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The increased number of acres planted to cover crops has raised questions on nitrogen (N) crediting for the 2014 cropping year. While there are many benefits touted for the use of cover crops, there are a lot of unknowns when determining N credits. This is especially true for mixes with multiple plant species. 

One of the benefits of cover crops is scavenging of N during the growing season. This N can potentially be released for the following year's crop. While there may be a benefit from additional N available to the next year's crop, the process of mineralization of N through the decomposition of residue can progress over the growing season. Thus, N may not be available during periods of rapid N uptake by corn. This delay in availability makes it difficult to predict the amount of available N using the total amount of N per acre contained in the crop. For small grain crops, if the crop was terminated when the crop was drying down, then no N credit should be used.

When estimating the amount of N potentially available, from a cover crop, it is important to consider the capacity of the cover crop to scavenge N. In cases where a non-legume cover crop was planted and no N was applied, there is no reason to believe that a significant amount of N should be credited for the next crop. If a significant amount of fertilizer N or mineralized soil organic N was left over by the 2013 crop, some N would be available for the cover crop. However, it is difficult to determine just how much of the N would be available for the next crop given the fact that not all N scavenge by the cover crop may be available in time for next season's crop.  A small credit of 10-20 lbs of N may be warranted but fields should be monitored the following year starting in June to ensure adequate N is available for the following crop. One tool that can be used stating in June is the supplemental N decision guide for corn. The greatest potential for N scavenging would occur where fertilizer was applied to the 2013 corn crop.

Legumes would provide the best chance of an N credit for the next year's crop.  Data are available for the use of legumes as green manure crops.  [Data from Wisconsin (see link below)]  Most of the N credits are for mono-cultures of green manure crops.  It is less clear as to how much N, if any, should be credited back when grown in a mixture and it would not be suggested to take a full credit for a legume crop in these situations.  Care should be taken not to over credit legumes the following year since deficiencies may not show up until it is too late to make supplemental applications of fertilizer N late in the season.

Wisconsin data on N credits following green manure crops

For fallowed ground there can be a significant N credit for the following year.  One option to more accurately determine the amount of N available would be to take a two-foot depth soil sample to determine the amount of nitrate potentially available the next year.  The samples can be collected in the fall in western Minnesota and in the spring in central Minnesota, as long as no fall N is applied.  The two foot N test is less reliable for southeastern Minnesota.  For southeast Minnesota, the pre-plant N test can be taken to better determine the amount of available N.  This would provide a better estimation of available N than just taking a standard N credit.  These tests would not provide an accurate picture of the amount of available N released from a cover crop, thus they are not recommended where cover crops were present.

There is a lot of information available on the web about crediting cover crops.  Make sure that any information used is from credible sources.  While many benefits for the use of cover crops have been stated there still are many issues that have yet to be resolved, such as N crediting or other fertility concerns such as fallow syndrome in corn.  Be aware of these issues and always try to make an informed decision.  

More information for using the soil nitrate test in MN.

The Supplement Nitrogen Worksheet for corn.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

LPV Seed Treater

The LPV Seed Treater has set a new standard boasting three configurable weighing methods for any-sized operation, a standard 42” ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form