A report card on corn N management

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

With excessive early season rain and delayed planting, many corn growers are wondering if their traditional nitrogen (N) fertilizer practices were adequate this year. Growers who received unusual amounts of rain after planting or sidedress N applications are concerned about a potential late season N deficit, especially with corn being very tall and lush in vegetative growth. These growers should monitor their crops for early firing and other foliar symptoms associated with N deficiency. Even though N use efficiency can be improved by several split applications up until the tassel stage, most growers do not have the right tools to apply N beyond the typical sidedress stage in the middle of June.

The end-of-season cornstalk nitrate test is a useful diagnostic tool to assess overall N management. The methodology and interpretation of this test were discussed in some detail in my 2011 Michigan State University Extension article, “End of season corn stalk nitrate test.” The nitrate N concentration in the lower portion of the corn stalk after the black layer formation is a good indicator of the N status the crop experienced during the season. As corn approaches maturity, plants stressed for N will remobilize N from the lower cornstalk to the kernels, resulting in a low stalk N concentration. Conversely, if plants had excess available N for maximum yield, this N tends to accumulate in the stalk.

Accordingly, the stalk nitrate N concentrations are divided in to three broad categories:

  • LOW (less than 450 ppm)
  • OPTIMAL (450 to 2,000 ppm)
  • EXCESS (greater than 2,000 ppm)

The LOW range indicates a N shortage situation, and often associated with visual deficiency symptoms. The OPTIMAL indicates N availability that corresponded to maximum economic returns. The EXCESS range indicates N availability greater than required for maximum economic returns. Quite often the excess range is associated with over application of N fertilizer or animal manures.

The test has a few limitations. Consideration has to be given to weather conditions that prevailed during the season. In abnormally dry years, higher nitrate levels may accumulate in the stalk and, conversely, in wet years such as 2013 the stalk nitrate levels are expected to be lower than in a normal year. Also, deficiencies of N early in the season may sometimes limit grain yield in ways that may not be directly reflected by the stalk test. Under normal conditions, however, the test values should fall within a range that will be reflective of an overall assessment of N practices during the growing season.

The test does not provide any remedy for the current year, but familiarity with the data over a number of years should assist in producers finetuning their N fertilizer practices to suit seasonal changes in weather. Please refer to MSU Extension Bulletin E2904 for the latest corn N recommendations.

Field areas with different soil types or management zones ideally should be sampled separately. The time of sampling is very critical. It is two to three weeks after physiological maturity or black layers have formed on 80 to 90 percent of the kernels. At this stage, any further mobilization of N to the kernels has ceased and most leaves have turned color.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (1) Leave a comment 

e-Mail (required)


characters left

k s sandhu    
india  |  September, 03, 2013 at 09:03 PM

The optimal range appears to be wide.Can some fine tuning be of any benefit?

Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form