2014 spring N fertilizer recommendations for wheat

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Wet, saturated soils and variable environmental conditions certainly complicate issues associated with nitrogen fertilization of wheat fields in the Mid-South. In order to implement proper management, we must evaluate wheat health and growth stage to determine current nutritional needs and appropriate timing that suit what the crop needs in each field. Variables like planting date and variety may greatly affect crop condition and maturity affecting wheat management needs. If a field shows poor tiller development or signs of nitrogen deficiency, you need to apply enough nitrogen to meet its demand or the crop will suffer yield loss. Nitrogen nutrition primarily influences vegetative biomass and plant heath, rather than maturity, so it is not as critical as other factors affecting wheat maturation. Maturation is primarily determined by planting date and variety response to temperatures and photoperiod. Thus, delaying nitrogen application may only reduce wheat yield potential by depriving plants of nutritional needs.

Keys for Wheat Fertilization Success – There are several keys to successful wheat nitrogen fertilization in Mississippi.  Split application of nitrogen fertilizer is likely more important for wheat than any other crop, including corn. This is because wheat nitrogen fertilization occurs during the wettest months of the year – in a high rainfall, warm regional climate conducive to nitrogen loss. Thus, considerable nitrogen losses may limit productivity, particularly if we experience prolonged, soggy weather during the early spring. Likewise, nitrogen application timing can be very important, particularly for the first spring application. Optimal nitrogen timing can vary substantially from year to year and field to field because seasonal weather and temperature fluctuation primarily affects wheat development (along with specific planting date and variety). Therefore, you can make better fertility decisions, by closely monitoring wheat health and development, and evaluating the weather forecast. This knowledge can help you make more appropriate fertility decisions, rather than exclusively relying on specific calendar dates and rate guidelines. Using best management practices can substantially improve fertilizer efficiency, crop yields and profitability – especially since input and commodity prices are high.

Split Application Guide – I believe the most prudent method to apply nitrogen to southern wheat is either a 2-way or a 3-way split with at least 2/3 of the nitrogen applied in the late split(s).  Using split nitrogen applications with the majority of fertilizer applied late will satisfy crop demand without subjecting a substantial amount of expensive N to losses during wet, saturated conditions typical during the early spring. Only a small amount of the total N is theoretically needed in the first topdress application (20-30 lbs. N/a.), because rapid wheat nitrogen uptake does not occur until wheat stem elongation begins. The initial topdress of a split application should be applied when dormancy breaks in late‑winter while wheat is in prostrate, tillering stages (Feekes growth stage 3 or 4 – normally early February). Neglecting wheat nutritional needs during tillering stages limits the number of tillers which will produce viable heads. Thus, proper nitrogen timing is essential to produce high wheat yields. Thereafter, N can be applied according to crop needs, which increase with vegetative development. A second nitrogen application should occur when plants become strongly erect and stem elongation begins, and again prior to boot stage, if you choose to make a third application.

Nitrogen Sources – Urea is the most commonly used nitrogen source on wheat because it is generally the most economical nitrogen source, it can be applied by air, and volatility is less likely to be substantial during the wheat season (because temperatures are cool and rain is frequent), than during the summer. Likewise, the need for urease inhibitors, such as Agrotain, is less during the early spring, compared to late-spring or summer applications of urea-based nitrogen sources. Ammonium sulfate should generally be applied in an early application, if sulfur may be needed. Liquid nitrogen solution (UAN) can potentially burn leaf tissue, especially if high rates are broadcast on erect wheat, so granular nitrogen sources are generally preferred, particularly for single, or the latter split applications.

Nitrogen Rates – Our wet southern climate may influence nitrogen use efficiency considerably depending upon seasonal rainfall frequency and amount. Thus, specific nitrogen rate suggestions based solely upon crop yield goal are not very reliable for wheat production in the South. Since soil texture significantly influences soil-water relations and potential nitrogen loss during typical wet springs, our general recommended spring nitrogen rates vary depending on soil texture. We normally suggest from 90 ‑ 130 lbs. N/a. on light-textured soils and 120 – 150 lbs. N/a. on heavy clay soils. However, monitoring crop response to nutrition, culture and environmental conditions offers producers substantial opportunity to fine tune your rate more specifically.

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form