The science behind N credit for soybeans

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

“Take a N credit for corn following soybean.” This statement, or something like it, is common to most N recommendations for corn. The idea is that after a soybean crop, corn doesn’t need as much fertilizer N. The common perception is that because soybean is a legume, it adds to the overall N supply in the soil. Let’s take a closer look at what is going on with this credit.

The credit itself amounts to a reduction in fertilizer N ranging somewhere between 20 and 60 lb N/A, depending on the recommendation system. It can even be more in some cases. Some universities recommend a flat rate reduction, while others vary the credit based on soybean yield. Still others use a combination of the two. Common to all of them is that the credit is based on a comparison to a continuous corn system, which typically takes more N to grow a corn crop to the same yield level.

So does corn following soybean use less N or should we really think of it as the continuous corn crop needing more N? It all depends on which one is used as the basis of comparison. A continuous corn crop has more residue that is higher in C. Soil N can be immobilized for a time by soil microorganisms as they utilize the C in this residue, reducing the N available in the soil. Adding the additional 20 to 60 lb N/A makes up for the immobilized N and may also speed the organic matter mineralization process.

Contrary to common perception, levels of nitrate in the soil are often lower after a soybean crop than they are after a corn crop. Soybeans get their N either from the nitrate already present in the soil or from the N fixed by the bacteria present in the nodules. The more nitrate present in the soil, the less comes from the nodules. Consequently, soybeans actually deplete, rather than increase, soil nitrate levels.

So where does the “extra” N come from following a soybean crop? It is currently thought that exudates from soybean roots, as well as the roots themselves, increase a pool of organic N that is easily mineralizable. In the Midwest and Northern Corn Belt, this N becomes available early enough in the season that it reduces the fertilizer N needed, leading to the credit. However, in the warmer, more humid southeast U.S., this N can be mineralized too early in the season, resulting in no credit. In fact, many states in the southeast U.S. do not have a soybean credit.

The soybean credit therefore appears to have more to do with the soybean root system than with the above-ground stem, leaf, and pod residue left after harvest. Consequently, a late season disaster like hail damage wouldn’t be expected to reduce the N credit much if the crop was near maturity when it happened. In fact, it likely increases the credit since the high N soybean seed is left in the field and will quickly mineralize once contact with the soil occurs. The magnitude of this credit will be influenced by the duration of warm soil temperatures and the amount of precipitation received afterward in the fall and subsequently in the spring.

The N credit is more than a number. Although it is a simple part of recommendations, it actually reflects a complex set of reactions in soils. Having a better understanding of the science behind the credit can help advisers make adjustments under changing conditions.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (1) Leave a comment 

e-Mail (required)


characters left

USA  |  January, 26, 2012 at 01:22 PM

Another great article from IPNI. This soybean N credit has been a mystery.

Blend and Bulk Tower Systems

Waconia Towers provide speed, efficiency and reliability that only gravity-fed systems can offer. Towers are available with up to 300 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form