Study shows corn response to rotation, reduced N

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Corn grown in rotation with soybeans requires less nitrogen fertilizer than continuous corn, while producing higher average yields per acre, according to a recent research study by Pioneer Hi-Bred, a DuPont business.

"Our research shows that corn residue acts like a 'sponge' immobilizing the fertilizer, making it temporarily unavailable to the corn plant," says John Shanahan, Pioneer agronomy research manager. "Growers working with continuous corn need to be mindful of crop residue from the previous year and adjust (and likely increase) their nitrogen fertilizer rates accordingly."

These findings are part of a long-term, multi-location study by Pioneer that began in 2006 to examine the response of corn in limited nitrogen environments. Evaluations have been conducted yearly at Pioneer research stations in Johnston, Iowa; Champaign, Ill.; Windfall, Ind.; and York, Neb. (Note: The 2011 results were from only the Iowa, Illinois and Nebraska locations.)

"While many studies have tested corn response to nitrogen fertilizer, there has been limited information on corn hybrid performance in nitrogen-deficient environments," Shanahan says.

The nitrogen treatments in the study were standardized to five rates as a percentage of university economic optimum recommendations (from 0 to 130 percent), applied to corn in continuous production as well as corn in rotation with soybeans, and positioned on the same plots from year to year.

"As expected, corn yield increased with increasing nitrogen rates in both continuous corn and rotated corn and decreased with reduced rates," Shanahan says. "But what's interesting is that across all tested nitrogen rates, the average yield was higher for corn in rotation versus continuous corn by 33 percent or about 45 bushels per acre."

Furthermore, reducing nitrogen rates resulted in much more substantial yield decreases for continuous corn than for rotated corn. For example, rotated corn with no applied nitrogen yielded more than continuous corn with 50 percent of the normal nitrogen rate applied. In addition, reducing rates caused nitrogen stress sooner and with more yield impairment for continuous versus rotated corn.

Similar results have been observed by several university researchers and generally can be attributed to the higher residue levels for continuous corn, leading to Pioneer's recommendation that growers pay key attention to crop residue and fertilizer rates.

To provide further assistance to growers in the future, Pioneer is starting to look into the response of specific hybrids to nitrogen rates and crop rotations. This will be part of the ongoing study as researchers evaluate nitrogen use efficiency among different corn genetics.

"There is a lot of value in analyzing corn responses to crop rotation and reduced nitrogen environments," Shanahan says. "Our goal is to help growers make the best decisions, from hybrid selection to crop management, for their fields."


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


LAYCOTE™ Automated Coating System

The New LAYCOTE™ Automated Coating System provides coating accuracy for stand-alone coating systems and for coatings (impregnating) in automated blending ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form