May want to avoid applying nitrogen to wheat in February

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Producers are tempted to apply nitrogen (N) in February because it is easy to drive across the field and there is no competition with other farm activities. However, research has shown that this may be a costly operation in lost nutrients and a potential environmental concern (nutrients may leave the field and move into streams and other waterways).

A three year OSU study showed that when N is lost from a pre-greenup application (February), yields will be significantly reduced to where they are only slightly better than areas that receive no N. The outcome was the same regardless of the N source. In this same study, when nitrogen loss occurred on the pre-greenup applications, urea ammonium nitrate (28% solution) did not “burn” into the soil, ammonium sulfate did not “stabilize” into the soil, and urea did not stay put until a rain. All three of the sources moved off the plots with water as the soil thawed out, much like losses from manure on frozen ground. Even though polymer-coated products were not tested in this study, it would be expected that these types of N products would also be lost in a similar fashion under the same conditions.

As with phosphorus, the 4R nutrient management philosophy also applies for N. The right time to topdress spring N on wheat is between greenup and early stem elongation (Feekes Growth Stage 6). Rapid uptake of N by wheat generally does not begin until the latter part of April (early stem elongation). Depending upon the source, the risk of N loss increases for every week that applications are made prior to early stem elongation. Since fields may be unfit for application at early stem elongation, a practical compromise is to topdress N any time fields are suitable for application after initial greenup to early stem elongation. Research has shown that significant yield losses generally do not occur from delayed topdress until about late stem elongation to boot stage (Feekes Growth Stage 8 to 9).  Boot stage refers to when the wheat head is fully developed and can be easily seen in the swollen section of the leaf sheath below the flag leaf.

A producer may get away with applying N in February on wheat. However university data has not shown a yield advantage for February applications, but results have shown a major N loss and yield reduction from pre-greenup applications. Why take the risk, just wait until greenup; the wheat does not need most of the N until April and May anyway. 

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left


Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form