Managing high phosphorus soils

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Over the next few months my articles will discuss potential practices dairy farmers could consider to reduce their farm's excess phosphorus balance, which is importing more phosphorus into a farm system than is exported. A number of years of net phosphorus imports into a farm system usually results in excess phosphorus levels in the soil. I have had the opportunity to visit a number of dairy farms and beef feedlots around Minnesota to collect data for a phosphorus balance project. As a result we are going to illustrate a number of management practices that are in most cases good for both the bottom line and the environment.

In recent articles we discussed potential negative environmental consequences of excess and/or improperly managed phosphorus in our fields. The problem is that excess phosphorus entering surface water contributes toward eutrophication, or rapid growth of plant life. This excess plant life eventually dies and sinks to the bottom, the decaying material causes an oxygen shortage for desirable fish and plant life. We typically observe eutrophication as algae blooms. Agriculture is certainly not the only contributor of excess phosphorus into the environment, but we are not immune from it either.

The nitrogen to phosphorus ratio in manure is much narrower the nitrogen to phosphorus ratio needs of corn. In many situations manure has been applied to supply the nitrogen needs of corn, consequently more phosphorus is applied than is necessary for crop production. Repeating this practice regularly over a period of years frequently escalates the soil phosphorus level. Unlike nitrogen, which can be lost through volatilization, denitrification or leaching, phosphorus is quite stable once mineralized into the soil and only will leave the field mostly through soil erosion or plant uptake. Any erosion off of fields with higher than necessary phosphorus can potentially result in more phosphorus entering our lakes, rivers and streams than would with normal levels of soil phosphorus. Implementation of conservation methods such as buffer strips, contour farming, minimum tillage and other practices are excellent in helping to reduce potential phosphorus runoff. However, there is a certain amount of soil erosion in all systems, even full vegetative cover, so keeping the soil phosphorus level from escalating is a constructive strategy under all cropping or grassland systems.

One spring operation that brings phosphorus into a farm system is corn starter fertilizer containing phosphorus. Adequate phosphorus is necessary for normal growth of any plant and corn is no exception. In the present economic culture of striving for every last bushel or pound, we typically do not want to "miss anything". So many farmers automatically spend money on corn starter fertilizer containing phosphorus and consider it "insurance". Current University of Minnesota suggestions for soils testing from 21 to 25 ppm Bray 1-P is to add 10 to 15 pounds per acre of banded phosphate. When soil phosphorus is higher than 25 ppm Bray 1-P, no phosphorus is generally suggested. Both corn grain and corn silage research on soils testing higher than 30 ppm Bray 1-P in phosphorus with a history of manure application is limited and yield response from adding fertilizer with phosphorus has been inconsistent. Occasionally in the early vegetative growth stages of corn, we observe visual differences between plants that receive starter fertilizer with phosphorus and those that do not. Early vegetative growth has not always proven to provide extra yield in the fall.

So when might we consider not using starter fertilizer containing phosphorus? This is potentially easier managed if the field has been grid soil sampled. The high nutrient variability observed with grid soil sample maps could explain some of the yield inconsistency experienced when adding or withholding starter fertilizer containing phosphorus on fields that have only a composite soil sample. If there is considerable variability in soil test phosphorus across the field, applying starter fertilizer containing phosphorus in the field areas below 25 ppm Bray 1-P would be recommended and would likely improve consistency of early plant growth and yield in those areas. We could then consider withholding starter fertilizer containing phosphorus in those areas in the field over 25 ppm Bray 1-P. This use of precision agriculture can save us some input costs, maximize yields, reduce our phosphorus imports and help protect our environment.

So is it a good idea to withhold starter fertilizer containing phosphorus on high phosphorus testing soil? It certainly should be considered; many livestock farmers have done it and they think it has been a good decision.

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Aluminum Grain Trailers

Maurer Manufacturing offers a complete line of high quality aluminum grain trailers. Manufactured in Spencer, Iowa, Maurer aluminum grain trailers ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form