Is there any value to starter fertilizer on soybeans?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Soybean is a crop that can remove significant amounts of nutrients per bushel of grain harvested. Because of this, soybeans can respond to starter fertilizer applications on low-testing soils, particularly phosphorus. 

In many cases, corn shows a greater response to starter fertilizer than soybean. Part of the reason for that is that soils are generally warmer when soybeans are planted than when corn is planted. The typical response in early growth observed in corn is usually not observed in soybeans. However, yield response to direct soybean fertilization with phosphorus and other nutrients if needed in low-testing soils can be expected.

K-State guidelines for soybeans include taking a soil test for phosphorus (P), potassium (K), sulfur (S), zinc (Zn), and boron (B). If fertilizer is recommended by soil test results, then fertilizer should either be applied directly to the soybeans or indirectly by increasing fertilizer rates to another crop in the rotation by the amount needed for the soybeans.

The most consistent response to starter fertilizer with soybeans would be on soils very deficient in one of the nutrients listed above, or in very high-yield-potential situations where soils have low or medium fertility levels. Furthermore, starter fertilizer in soybeans can be a good way to complement nutrients that may have been removed by high-yielding crops in the rotation, such as corn and help maintain optimum soil test levels.

Banding fertilizer to the side and below the seed at planting is an efficient application method for soybeans. This method is especially useful in reduced-till or no-till soybeans because P and K have only limited mobility into the soil from surface broadcast applications.

However, with narrow row soybeans, it may not be possible to install fertilizer units for deep banding. In that situation, producers can surface-apply the fertilizer. Fertilizer should not be placed in direct seed contact with soybeans because the seed is very sensitive to salt injury.

Soybean seldom responds to nitrogen (N) in the starter fertilizer. However, some research under irrigated, high-yield environments suggests a potential benefit of small amounts of N in starter fertilizer.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Portable Conveyors

Convey-all portable conveyors are designed to handle your crops gently and efficiently. We offer an extensive line of high capacity ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form