I'll never apply fall nitrogen again!

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

I have heard several growers exclaim that they will never fall apply nitrogen again. Although fall-applied fields often suffered more loss than spring-applied fields, it is not always the case.

Growers that applied late in the fall when our recommendations would suggest it was safer are more satisfied with their results than those that were early. For those who cannot recall our recommendations for fall nitrogen timing, here they are again.

  1. Do not fall apply N on soils that typically flood in the spring or to soils with sandy loam or coarser textures.
  2. Do not even think about applying anhydrous ammonia until October 1.
  3. After October 1, check the soil temperature measured at 4 inch depth from 6-8AM. When it hits 50 F, it is practical to apply anhydrous ammonia (but not urea!)
  4. A week after the date for anhydrous ammonia, growers can start applying banded urea.
  5. 2 weeks after the date for anhydrous ammonia, growers can start broadcast-incorporating urea.

This past season, the date the soil temperature dropped to 50 F was about October 15. That means that banded urea application should not have begun until October 22 and broadcast urea until October 29.

I know that a great deal of fall N was applied before these dates. I know that I traveled to Bismarck for a meeting about September 20 and there was a grower applying anhydrous ammonia to a field near Jamestown. I also saw urea applicators in the field about the same time in the Valley. This was a very bad plan.

There is nothing wrong with well-timed fall N application in North Dakota. In years of dry weather, it didn’t matter when nitrogen was applied. If the last 18 years of wetness is an indication of the beginning of a trend, I think that this winter and spring will also be wet and we will be set up for losses for N that was applied too early. Agronomy does not always mesh with convenience. Although many growers have a ‘harvest gap’ in September after small grain harvest and before soybeans/corn/sunflower, it is not the time to fall apply N. P and K can be applied during this time, but not N. Too many bad things can happen to early applied N if it is applied too early with too much fall ahead of it.

A nitrification inhibitor should be used not to move the date of application earlier, but to protect the N-applied at a safer date from unanticipated losses from early spring wetness. N-Serve can be applied with anhydrous ammonia to protect N from losses due to nitrification in the fall/spring. Instinct is an encapsulated form of nitrapyrin (active ingredient in N-Serve), and the label I have currently lists it as a spring additive with urea or UAN. Check with your Dow-Agro Sciences rep to see if it is labeled for fall application with urea. In the spring, products with the additive DCD (examples are Super-U by Agrotain, Int., or Guardian by Conklin) will also slow nitrification. One product that is sold as a nitrification inhibitor, but does not function like one is Nutrisphere. It is neither a nitrification inhibitor nor a urease inhibitor and should not be used as one.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Smooth Wall Grain Bins

Meridian’s SmoothWall bins are the ultimate storage bins, used to handle and store fertilizer, grain, feed and seed, and extend ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form