Approaches for recommending P and K fertilizer

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

After soil samples have been obtained and analyzed, the laboratory or consultant must somehow arrive at fertilizer recommendations for a crop. Part of the challenge is that there’s more than one way to recommend fertilization. Most of the information below was adapted from an excellent PPI (IPNI) Better Crops article from a few years ago (Leikam et al., 2003. Better Crops vol. 87, no. 3).

Sufficiency (feed the crop) approach – The goal of this approach is to apply just enough P and/or K to maximize profitability in the year of application, but minimize fertilizer application rate and costs each year. Unless initial soil test levels are high, nutrient applications will be required every year in order to eliminate profit robbing nutrient shortages. Specific application methods, such as the use of band application, may also be needed for maximum nutrient response.

Sufficiency recommendations are typically developed to provide 90 to 95% of maximum yield. Crop response and recommended nutrient application rates are highest at very low soil test levels, and nutrient application rates decrease to zero as the soil test level increases to the ‘critical’ soil test value. The critical level is the soil test value at which the soil is considered capable of supplying sufficient amounts of P and/or K to achieve 90 to 95% of maximum yield. With this approach soil test values are not viewed as a managed variable and there is little to no consideration of future soil test values.

Build-maintenance (feed the soil) approach – This approach treats P and K soil test levels as controllable variables. At low soil test values, recommendations are made to apply enough P and K to meet both the needs of the immediate crop and to build soil test levels to a non-limiting value, at or above the critical level. The build-up of soil test values occurs over a planned period of time, typically 4 to 8 years. Once the soil test level exceeds the critical value, future nutrient recommendations are made to maintain it in a range at or just above the critical level (medium to high range) where the soil can provide adequate P and K to meet the needs of growing crops. Above the critical level the soil is largely capable of supplying the nutrients needed in a given year; however, below this level yearly nutrient applications are necessary to optimize production. Thus the build and maintain approach ultimately provides greater flexibility to manage both time and cash flow since farmers can choose to apply maintenance fertilizer annually, or to combine applications and only apply the fertilizer every two or three years.

Build-maintenance fertility programs are not intended to provide optimum economic returns in any given year, but to provide high levels of grower flexibility and good economic returns over the long-run by removing P and K as limiting factors. The disadvantage of this approach is the cost of the build phase when initial soil test levels are below the critical value.

Both approaches to P and K recommendations are sound, so we can’t really say that one is right and the other wrong. It’s really a question of which is more appropriate for a given set of circumstances. Factors such as land tenure and nutrient costs affect which approach is best for the farmer. Nutrient recommendations are not a one size fits all proposition, but should be tailored to fit the circumstances.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (1) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

Dan Aakre    
Minnesota  |  March, 27, 2012 at 08:54 AM

What about potassium source. How bad is potassium chloride for your soil? If you apply 100lbs/acre of potassium chloride you are also applying 40 lbs/acre of chloride. What does this do to your soil biology?


Quickveyor

Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form