Anions and cations in plants, but why do we care?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


There is a lot of biological and chemical activity occurring in your average soil. Most happens unseen and unheard, and that’s probably a good thing. Just because these organisms and processes don’t scream out, doesn’t mean growers shouldn’t pay attention to what goes on. In fact, paying attention can make the difference between a good and a great grower. In an earlier Michigan State University Extension article, “Knowing nutrient mobility is helpful in diagnosing plant nutrient deficiencies,” I discussed nutrient mobility within the plant and how understanding mobility helps identify nutrient deficiencies, but it is also important for growers to pay attention to nutrient mobility in the soil.

Plant nutrients exist in the soil as either anions or cations. What are they? Most molecules in natural systems have a positive or negative charge and it is this charge difference that helps drive chemical reactions to keep us all alive – that’s important. Anions are those elements or molecules that in their natural state have a negative (-) charge. Cations are those that in their natural state have a positive (+) charge. Negative charge, positive charge – who cares? Keep reading.

Most soil particles have a negative charge. The amount of negative charge depends on soil texture, such as sand, silt and clay content, which is directly related to soil particle surface area. The cation exchange capacity (CEC) determined by a soil test is a direct indication of the amount of negative charges on your soils. A soil with low CEC has fewer negative charges than a soil with a higher number. High sand soils generally have a low CEC, clay or silt soils are higher and organic soils are highest – all related to particle surface area.

Now the important part! Since soils are negatively charged and plant nutrients are positive and negative, some nutrients are attracted to soil while others are not – the “opposites attract” principle. Those nutrients that exist as anions (-) are moved through soil, meaning growers need to be careful how they are applied regardless of soil type. These nutrients readily travel wherever water carries them, leading to nutrient runoff and leaching and economic loss and environmental concern.

Cations (+) are more readily bound to soil, resulting in these nutrients moving through the soil more slowly. However, since low CEC soils have fewer negative charges, cations will move more quickly through low CEC (sandy-based) soils than they will through high CEC (loamy and silt/clay-based) soils.

All this positive-negative, cation-anion, high CEC-low CEC stuff comes into play when applying nutrients and water. Table 1 gives the soil-borne elements necessary for plant growth, the form taken up by the plant and the element’s mobility in the soil. Note that most mobile elements have a negative charge and the somewhat mobile and immobile elements have a positive charge. Over application of a (-) charged element followed by excessive water will quickly move that element through the system. Likewise, over application of most (+) charged elements on a low CEC soil can move that element through the system since there are not enough (-) charges on the soil particle surface to bind to the cation.

The odd anion is phosphorous. Even though it has a (-) charge, it is not mobile in soil because phosphorous forms are not very soluble. It can, however, still move – not as the anion, but bound to soil particles as the particles move. Therefore, minimizing runoff is helpful in reducing phosphorus pollution.

Understanding nutrient movement in soils helps producers apply nutrients and water to maximize economic effectiveness while minimizing environmental impact.

More information on plant and nutrient management can be found at “Soils, Plant Nutrition and Nutrient Management” by the University of Missouri Extension.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (2) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

Rudy Allen    
Western Washington State  |  December, 19, 2013 at 10:34 AM

The article make reference to table 1 but I don not see a table 1. If you are going to put in the article please put in all tables or supporting data.

John    
Hollister, CA  |  December, 20, 2013 at 04:32 PM

You will find it in the link “Soils, Plant Nutrition and Nutrient Management by the University of Missouri Extension", at the end of the article. Click on it for a more in depth article.


FarmRite

FarmRite allows service providers to process more acres and to produce cutting-edge information reports in less time and with less ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form