Fall soil testing

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Guessing at your lime and fertilizer needs just doesn’t cut it. Fall is a great time to do your soil testing!

Fall is by far the best time to take soil samples. You will have more time to sample properly than in the spring. You will have time to really think about the results and make plans for next year, which might include early ordering of fertilizer, deciding where manure might be most beneficial, etc. Soil and weather conditions are often better for sampling in the fall. You cannot afford to have your crop come up short because of lack of nutrients when you are making a significant investment in the many inputs required to put out the crop. At the same time, you cannot afford to apply extra nutrients that will not give you an economic return. The economics of soil testing are pretty simple. If you sample a 10A field every 3 years as recommended, the cost per acre is around $0.30/A/year. This very small investment in soil testing which results in recommendations that are used to manage typically more than $200 worth of nutrients on a crop that is worth over $1000/A. You can’t risk this magnitude of input costs and potential returns on a guess.  

Good soil test begin with good soil samples.  Here are some guidelines for getting good soil samples. 

  • Sample uniform areas

Usually we sample each field individually. However, there may be times when we need to subdivide fields if there is the potential for significant differences across the field. Examples include: significant soil differences, part of the field receives manure but not the whole field, topographic differences such as low areas versus sidehills, etc. Also, there are situations when we can combine fields. For example when we have small strips that are all managed the same we can lump these together into one sample.

  • Take lots of cores

At least 15 to 20 cores should be collected to make up a composite sample to send to the lab. More is better.

  • Sample to uniform depth

For most routine soil testing samples should be collect to plow depth. Even in no-till or permanent sods. Inconsistent sampling depth is one of the biggest sources of errors in soil sampling. This is especially true in no-till and reduced tillage systems where there is often significant stratification of nutrients in the soil.

Special note in no-till:  In no-till fields an acid layer, called an acid roof, can develop right at the surface of the soil. This thin acid layer can have a significant impact on the crop but it can be missed in a normal plow depth sample. If the normal plow depth soil sample in no-till recommends liming, apply the lime as recommended and no further testing is needed. If the normal sample does not recommend lime and the field has been in long-term no-till and has not been limed recently, take a less than 2 in. deep sample and test it for pH. This sample can be submitted to a soil testing lab or you can use a field pH test kit for this purpose. If this sample has a pH less than 6.2, then apply 1 ton of limestone even if the regular sample soil test did not call for any limestone.

  •  Avoid atypical areas or sample them separately

Sample between the rows and avoid any fertilizer bands as much as possible. Also, many fields have known atypical areas such as dead furrows, old fence rows, lime or manure stacking areas, wet spots, etc. If the areas are too small to manage separately, do not sample them. Taking one or two cores from these odd areas just contaminates the sample for the rest of the field. If the areas are large enough that you are able and willing to manage them separately, then take a separate sample from these areas.

  • Handle the sample carefully

Collect the soil cores in a clean bucket so as not to contaminate it, crumble the sample cores and air dry the sample. Mix the cores thoroughly and take a subsample to fill the mailer to send to the lab.

  • Fill out the soil test information sheet

Additional information such as the crop, the expected yield, the crop rotation, tillage depth, etc. are used along with the soil test results to make the recommendation. Thus, it is critical that the soil test information sheet be filled out completely and accurately.

Don’t Guess. . . Soil Test!

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Blend and Bulk Tower Systems

Waconia Towers provide speed, efficiency and reliability that only gravity-fed systems can offer. Towers are available with up to 300 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form