The moist soil test for potassium, other nutrients

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

A new private soil-testing laboratory began operations this fall in Iowa (based in Ames), testing for most nutrients on non-dried soil samples. This has generated many questions concerning the procedure and interpretations of test results because the common lab procedure for most nutrients is to dry and grind the soil samples.

The idea for testing non-dried soil samples is not new. It has been known for decades that drying soil may affect the extraction and measurement of certain nutrients, especially potassium (K). However, drying soil is commonly done by labs because it used to be a more practical sample handling procedure, and it standardizes soil moisture across all conditions. Iowa State University (ISU) research during the 1960s and 1970s, mainly greenhouse trials but some field trials, had shown that testing non-dried (field-moist) soil samples provided a better estimate of K fertilizer needs than testing dried samples, but both procedures provided similar estimates for phosphorus (P). Therefore, testing field-moist samples was adopted by the ISU soil and plant analysis laboratory, and it was the standard procedure for P and K during the 1970s and 1980s.

Iowa State University discontinued field-moist soil testing in 1988 (I was a graduate student at the time); not because it was a bad procedure but because no other lab adopted it and only ISU soil test interpretations were based on moist testing. The ISU lab made that decision even though Iowa research had shown the moist test was better for K, and it was among the tests recommended for the North-Central region by the NCR-13 committee (North-Central Regional Committee for Soil Testing and Plant analysis). Since ISU discontinued moist soil testing in 1998, the NCR-13 committee dropped the procedure from its soil-test methods publication.

The general attitude about moist soil handling and testing changed considerably this year, when the private lab that began operations in Iowa  developed a machine that easily handles moist samples and makes implementation of this procedure as practical as the common dry method (or even more practical because it avoids drying and grinding samples). This laboratory has been conducting soil testing research with Iowa soils since last year, some in collaboration with ISU.

Field research conducted during the 1990s showed much variability and uncertainty with K soil testing due to several reasons. So a portion of research my graduate students and I conducted since the early 2000s has focused on studying again if testing field-moist soil samples for K is better than testing dried samples.

click image to zoomFigure 1. Comparison of amounts of soil K, P, and Mg extracted by the Mehlich-3 test from many soil samples taken from Iowa fields. The dotted diagonal line indicates an exact 1:1 ratio. The amount of extracted K is lower for the moist test than for the dry test at values usually optimum for crops or lower, but the difference decreases as levels increase. At extremely high levels, the moist test values can be higher than the dry test values. However, the moist and dry tests result in approximately similar values for P (by the Bray-1, Olsen, or Mehlich-3 methods), calcium (Ca) and magnesium (Mg) (by the ammonium-acetate or Mehlich-3 methods), pH, and buffer pH (by the SMP or Sikora methods). Figure 1 shows, as an example, comparisons for K and P extracted by the Mehlich-3 method from moist and dry samples.

Results from more than 300 field-response trials for corn and soybean confirmed that the field-moist test for K is better. Figure 2 shows the relationship between soil K measured by moist or dry tests and the relative yield response of corn and soybean to K fertilization. The graph for the dry test shows the current ISU interpretations for K, and further information including recommended fertilization rates is available in Extension publication PM 1688, A General Guide for Crop Nutrient and Limestone Recommendations in Iowa. The graph for the moist test shows the interpretations that ISU suggested for this test in the late 1980s. The fertilizer rate recommended for the Medium class used at the time was the amount to maintain soil-test values based on K removal, which in concept is similar to current Optimum class for the dry test. The old moist test classes relate to the recent yield responses almost exactly as they related to yield responses from research conducted during the 1980s (not shown).

click image to zoomFigure 2. Relationship between the relative yield response of corn and soybean and soil-test K measured from dried and moist soil samples (ammonium-acetate test, 6-inch sampling depth). VL, very low; L, low; O, optimum; M, medium; H, high; VH, very high. Additional information and results will be presented at the North-Central Extension-Industry Soil Fertility Conference in Des Moines (November 14-15, 2012), the ISU Extension Integrated Crop Management Conference in Ames (November 28-29), and other ISU Extension conferences and workshops during the winter.

This fall the NCR-13 regional committee will publish an updated sample preparation chapter of the soil-test methods publication that includes the moist procedure. The ISU interpretations and fertilizer recommendations for the moist test will be developed in the future, as results for several ongoing field trials become available and can be merged with previous results. Interpretations for the moist test for P using Bray, Olsen, and Mehlich-3 (colorimetric or ICP procedures) should be similar to those for the dry test, since data already showed similar test results. The interpretations for the moist test for K likely will be similar to those suggested by ISU in the 1980s.

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Pacesetter Grain Hopper

The Pacesetter Gain Hopper features original and innovative ideas like the patented RollerTrap™, the industry’s easiest to open and maintain trap ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form