MicroSPEC: Managing Micronutrients

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Source: Matt Ruark, Extension Soil Scientist, Department of Soil Science, University of Wisconsin

Deciding when to apply micronutrients [Boron (B), Manganese (Mn), Zinc (Zn), Copper (Cu), Molybdenum (Mo), Iron (Fe), Nickel (Ni) and Chlorine (Cl)] in crop production systems is often a difficult task. Micronutrient fertilizers are sold in a variety of packages and marketed as a low-cost insurance for your cropping system. But, do you need to apply micronutrients? To answer this question, first consider your Soil, then your Plant, then your Experiences, then your Corrective options, referred to as the MicroSPEC philosophy. Information on how micronutrients are affected by soil and cropping systems can be found in several University of Wisconsin-Extension (UWEX) publications. These publications include Nutrient application rates for field, vegetable, and fruit crops in Wisconsin (UWEX pub. A2809) and our Understanding Plant Nutrients series (UWEX pubs. A2522, A2526, A2527, A2528, A3554, A3555 and A3556).

Soil. Soil properties and characteristics govern plant availability of most nutrients. Soil pH, texture and organic matter all control plant available micronutrient concentrations in soil solution. For example, Zn availability decreases as soil pH increases above 6.5 and Cu availability decreases as soil pH increases above 7.5. Also, soil tests have been developed to evaluate the status of some micronutrient concentrations in soil (e.g. Boron, Zinc and Manganese) (see UWEX pub. A2809). Knowing the abundance of the micronutrient, or factors controlling its availability is the first step in evaluating micronutrient need.

Plant. Does your crop have a "high demand" for micronutrients? UWEX guidelines have indicated the relative micronutrient requirements (B, Cu, Mn, Mo and Zn) for all crops grown in Wisconsin (see table 8.3 in UWEX pub. A2809).

Experiences. What are your experiences telling you? Have you observed micronutrient deficiency symptoms on the plant? If so, this should be confirmed with both a soil and plant tissue test. Interpretation of a plant tissue test is specific to each crop and timing of sampling (http://tinyurl.com/plantsampling). Photos of micronutrient deficiency symptoms can be found here. It is also important to consider the weather conditions during the growing season. If drought or flooding occurs, this can limit the plants availability to uptake nutrients. Once soil moisture returns to adequate levels, growth and uptake will resume. How have you managed your crop rotation lately? Increasing the occurrence of high micronutrient demand crops in rotation along with increasing yield can lead to greater micronutrient export from your soil system. Have you applied manure? Applying manure to satisfy nitrogen, phosphorus, potassium or sulfur requirements of the crop also applies sufficient levels of micronutrients. Micronutrient deficiencies are extremely rare in fields receiving annual additions of manure.

Corrective options. If your soil characteristics and soil tests indicate your soil may be deficient in plant available micronutrients, you are growing a high micronutrient demand crop and plant tissue tests indicate less than sufficient levels then micronutrients should be applied. There are several forms of micronutrient fertilizers (e.g. inorganic, chelates, liquid) and methods of application (broadcast, band-applied, foliar-applied) that are available. The recommended application rates with respect to form and method of application are outlined in UWEX pub. A2809. The value of your crop may also influence whether you want to or can afford to apply micronutrients. There is little agronomic or environmental harm in applying micronutrients to high or medium demand crops at UWEX recommended rates. But little, if any, return will be seen on this investment unless a micronutrient deficiency truly exists. Also be aware of the rates that are being applied to ensure that they are below what would be toxic to the plant.

Unfortunately, there is no magic bullet for deciding when to apply micronutrients. But following the MicroSPEC philosophy will allow you to make a reasoned decision regarding your micronutrient applications. It is important to evaluate each micronutrient independently, as each nutrient is affected in different ways by soil, plants and weather. For further information on micronutrients, please visit here.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form