Would more rain have made good yields better?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


The Illinois State Water Survey weather recording site in Champaign near the South Farms provided the following rainfall totals (in inches) in 2013: May – 4.65; June – 5.33; July – 3.47; August – 0.49; September – 0.50.

The dry weather along with high temperatures in late August into September – it reached 98 degrees on August 31 and again on September 10 – had many of us believing that yields would be lowered. I was also hoping that irrigation in a study we conducted here might bring us 300-bushel yields by preventing such a decline.

The irrigation study was conducted by grad student Josh Vonk, with help from others. It was planted following soybeans, with 180 lb of N applied as UAN before final tillage. On May 20, we planted about 40,000 seeds per acre of DeKalb hybrid DKC 62-08. Irrigation was done using dripline placed between row middles, with a row skipped between lines. We started to irrigate in mid-July, and from then to mid- September, irrigated plots received 9.66 inches of water, or about 1.2 inches per week. Rainfall totaled only about 2 inches over this period.

Besides comparing corn with and without irrigation, we applied as treatments 70 more lb of N on July 9 as Agrotain-treated urea, and foliar fungicide at silking. This made a total of eight treatments, ranging from nothing (the control) to all three added inputs – irrigated + extra N + fungicide. The idea was that extra N and fungicide would help yields more in irrigated plots, where water was not limiting.

We were much surprised when the control (nothing extra added) yielded 240 bushels per acre. Less surprising, adding extra N in non-irrigated plots failed to increase yield. Dry weather like we had resulted in little foliar disease, but many have come to expect that strobilurin fungicide will increase yield by helping to relieve stress under conditions like these. Fungicide did not increase yield in this case.

Adding water only – no extra N or fungicide – increased yield by 19 bushels (8 percent), to 259 bushels per acre. Adding 70 lb of N to irrigated plots added another 18 bushels, bringing yield to 277 bushels per acre. This N would easily have paid for itself under irrigation, but not without irrigation. As we saw in non-irrigated plots, adding fungicide failed to increase yields in irrigated corn, with or without extra N.

So in a season with good pollination conditions but a very dry second half, yields were outstanding even with normal input levels, and they were increased by less than 10 percent by water alone, and by about 15 percent by adding both water and extra N.

While 277 bushel per acre is nothing to complain about, it does leave us wondering what limiting factor prevented yields from being even higher. Temperature? Sunlight amount? We don’t expect we’ll ever know the answer for sure at these high yield levels. But we’ll keep looking.

It’s likely that soils have been “wrung dry” in the top 2 or 3 feet as they have had to provide the water that failed to fall from the sky. We’re also starting to see some evidence that soil nitrogen levels might also be low, presumably because N was taken up with water from deeper in the soil.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


ISOLynx

Ally Precision Industries brings new leadership to the future of precision agriculture through its offerings of superior technology and up-to-the ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form