Tillering in corn common this year?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

While visiting some of the corn hybrid trials that I manage in counties south of Fargo, I notice a high frequency of tillers on most of the hybrids. Typically I think of tillers occurring when plant populations are low, but that was not the case in these trials; plant stands were well above 30,000 plants per acre. Tiller production in corn is much less common than in small grains. Nevertheless, corn tillers result from normal physiological development processes similar to those in small grains. All basal nodes of the corn plant have buds that have the capacity to develop into tillers or ears. These buds are stimulated to develop tillers in favorable environments (i.e. adequate moisture, good fertility, reduced plant populations, border rows, etc.) or after early season injury. I am not sure why we are seeing so many tillers this year in the region of the state that I visited today, as I would not characterize our growing season so far as being exceptionally favorable for corn growth. Since we are likely to see more tillers this year than normal, I have summarized some of the facts about tillering in corn that I have gleaned from published research.

• Hybrids vary in their propensity to develop tillers. However, it is not uncommon for a hybrid that has a high proportion of tillering this year to produce few tillers next year. Environment tends to be more important than hybrid when it comes to tillering in a given year. If you are growing a hybrid that yields well, don’t abandon it just because it has tillers this year.

Tillering generally does not have a detrimental effect on corn yield, nor is it beneficial to yield. Tillers rarely form ears so do not contribute directly to yield, but the photosynthate produced in the tillers can readily move to the main stem if no ear forms on the tiller.

• Tillers very commonly produce tassel-ears, tassels that develop kernels and appear like an ear. Tassel-ears generally will not contribute to yield significantly and can be problematic in environments that are prone to the development of aflotoxins. It is fairly common to see smut or other diseases in these tassel-ears and kernels rarely form normally. 


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form