Skip-row corn reduces risk for western Nebraska

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Nebraska Panhandle farmers have been growing more dryland corn in recent years, encouraged by good crop prices and timely rains. However, without rain, corn production in the  Panhandle is a risky business. One way to help manage the risk is to use skip-row planting patterns.

As a result of research conducted by the University of Nebraska-Lincoln from 2004 to 2006, we can make some recommendations about skip-row planting patterns for dryland corn. The recommendations vary with the expected yield (see below).

Panhandle dryland corn acreage has varied from a low of about 10,000 acres in 1995 (prior to the 1996 farm bill), to a high of about 96,000 acres in 2000, the beginning of the eight-year drought. By 2005, dryland corn acreage had fallen to just 22,000 acres. Acres rose to 93,000 in 2011. Continued strong corn prices could see dryland corn acres in the Panhandle exceed 100,000 for the first time.

Skip-Row Trials Conducted in Three States

Twenty-three field trials were conducted to compare skip-row planting to conventional corn planting from 2004 through 2006 across Nebraska, western Kansas and northeast Colorado. In Nebraska, trials were located from Mead in the east to Scottsbluff in the west. Soils ranged from silty clay loams to very fine sandy loams.

Roundup Ready corn hybrids adapted to the location were no-till planted into the preceding crop residues. Nitrogen fertilizer was applied in all studies based upon soil nitrate tests and expected yields.

All trials were conducted without irrigation (dryland) and consisted of four planting patterns and three plant populations. Planting patterns were:

  • the standard planting pattern, consisting of planting every row using a 30-inch row spacing,
  • plant two rows and skip one row,
  • plant one row and skip one row (single skip-row)
  • plant two rows and skip two rows (double skip-row).

Plant populations were selected to represent a broad range of recommended populations for an area. In western Nebraska and Kansas, plant populations were 10,000, 15,000, and 20,000 plants per acre; in eastern Nebraska, 15,000, 22,500, and 30,000; and at Akron, Colo., 8,000, 12,000, and 16,000.

The purpose of including various plant population treatments was to understand how plant population interacted with planting pattern. Study results did not show a strong link between these factors.

click image to zoomFigure 2. Yield differences of skip-row planting patterns relative to the standard planting pattern in a 30-inch row spacing. Markers above the 0 horizontal line indicate that skip-row performed better than traditional planting, while those below the line indicate skip-row did not yield as well as traditional planting . P2S2 = plant two rows, skip two rows; P1S1 = plant one row, skip one row; and P2S1 = plant two rows, skip one row A Regional Recommendation

Relative yield of the various skip-row planting patterns were compared and related to the standard planting pattern for each site and across all 23 trials.  In lower yielding environments, skip-row planting patterns improved grain yield compared to the standard planting pattern. (See Figure 2.)

The data indicate that in lower yielding environments, the gain from using skip-row patterns, particularly the double skip-row pattern, will likely be greater than for the standard patterns.  However, in higher yielding environments, skip-row patterns will likely produce less yield than traditional planting.

The benefits of skip-row planting patterns for stabilizing dryland corn grain yields should be considered by all dryland growers in the Central Great Plains west of 101° W longitude.

Risk-averse growers will see the greatest reduction in yield variability with the double skip-row pattern, while growers with moderate risk-aversion may want to consider the single skip-row pattern. We recommend using either of these two patterns when grain yields are expected to be less than about 75 bushels per acre.

If yields are expected to fall between 75 and 100 bushels per acre, growers may consider using the single skip-row pattern. For areas with yield potentials of more than 100 bushels per acre, growers should use standard planting patterns. We did not see sufficient response to planting two rows and skipping one row to recommend its use instead of the standard planting pattern.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Direct Drive Rotary Blender

The Doyle 8, 10, 13, & 16 ton Direct Drive Rotary Blender’s are the industry’s fastest rotary blenders. These units ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form