Right seeding rate can boost yield

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

COLUMBIA, Mo.– When it comes to corn seeding rates, sometimes less is more.

Planting more seeds per acre in an effort to maximize yields won’t always maximize your return on investment, says Brent Myers, University of Missouri Extension corn specialist.

The drought of 2012 and 2013’s roller-coaster weather showed that planting date, precipitation, growing degree days and other factors influence the relationship between seeding rate and yield, Myers said.

Myers presented the results of statewide tests of seeding rates at the recent MU Extension Crop Management Conference.

In the 1930s, a common seeding rate for corn was 12,000 seeds per acre.  Tolerance to high seeding rates has increased since the introduction of hybrid corn.  Farmers today typically plant 24,000 to 34,000 seeds per acre.

Seeding rates in Missouri vary greatly because of the diversity of the state’s growing regions.

“Consider the soil properties when determining rates,” Myers said.

Increasing seeding rates heightens competition for nutrients and water. Crowded plants with overlapping canopies even compete for sunlight. Plant stress may result in spindly plants with narrower and weaker stems. Stressed plants produce longer roots, more root dry matter and a higher root-to-shoot ratio. Poor stalk strength can result in lodging problems at harvest.

Kernel numbers increase when the seeding rate numbers go up, but only to a certain point, Myers said. Kernel numbers per plant eventually plateau and decrease with higher plant populations.

“Weather has a major effect on whether or not you chose the right seeding rate,” Myers said. “Unfortunately, that only happens after the fact.”

Without knowing the weather in advance, farmers must consider the soil.

“In stressful soil landscapes, where water and nitrogen may be limited, moderate seeding rates (26,000-28,000 seeds per acre) are preferred,” he said. “However, if you have irrigation, loamy soil and plenty of nitrogen, the seeding rate can be much higher (30,000-34,000).”


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Blend and Bulk Tower Systems

Waconia Towers provide speed, efficiency and reliability that only gravity-fed systems can offer. Towers are available with up to 300 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form