Premature corn kernel sprouting (aka vivipary)

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Vivipary, the premature germination or sprouting of corn kernels on the cob prior to harvest, is not a common problem in Indiana but sometimes can be serious enough to warrant attention from growers. Technically, the fact that corn kernels have the ability to germinate and develop into seedlings is not odd. Yet, when such sprouting occurs while immature or mature kernels are still attached to the cob, we consider it odd and assign a fancy name to it to reinforce the fact that we consider it odd. On the rare occasion when viviparous germination occurs throughout a field to a large enough degree, overall grain quality can deteriorate enough to cause problems with drying and storage of grain. Another consequence of the increase in the percentage of “broken corn and foreign material” in affected grain delivered to the elevator is that it may result in significant grain price discounts to the grower.

Germination of mature corn kernels on the cob prior to harvest is most likely to occur when reasonably dry kernels ( less than about 20 percent grain moisture content) are re-wetted, especially when temperatures are warm. Consequently, the common situation for vivipary to occur is the combination of dry grain, upright ears on the plants, and rainfall that is “captured” by the husk leaves of the upright ears. The result can be sprouted kernels near the butt of the ear. The likelihood of viviparous germination occurring on upright ears with grain at higher moisture contents is typically much less than for dryer grain.

Another common situation where vivipary occurs is when ears are lying on or near the soil surface due to severe stalk breakage or lodging. That proximity of the ears to moist soil allows a similar re-wetting of the kernels and dramatic germination of kernels on the cob much like we would typically see the following spring............. at which point we no longer use the fancy “vivipary” term, but simply refer to it as “volunteer corn”.

It is generally accepted that germination of kernels typically does not occur prior to physiological maturity (aka black layer). The reasons for this are related to hormonal balances within the kernels; apparently the balance between gibberellin and abscisic acid in particular. In fact, this balance seems to determine whether seed development and maturation continues or seed germination is enabled (White et. al., 2000).

The concept of a balance among hormones playing a vital role in determining whether seed will continue developing or whether it germinates may also help explain why vivipary often occurs in immature kernels on ears physically damaged by hail, birds, or ear molds. The speculation is that the physical damage to immature kernels may disrupt the normal balance among the regulatory hormones and allows for the germination of the damaged kernels. Some ear molds also produce gibberellic acid that can also disrupt the balance of hormones and stimulate germination.

Considerations for reducing the consequences of poor quality grain that can result from significant levels of vivipary include timely harvest of severely-affected fields, drying grain at higher temperatures to prevent further growth of the young seedlings, screening the grain prior to storage to reduce the amount of damaged grain and seedling tissue, and removing several loads from a full bin (aka “coring” the bin) to reduce the high concentration of broken corn and foreign material that typically accumulates in the center of a bin during filling.

Related References

Anonymous. Pioneer Hi-Bred Int’l. Premature Germination of Corn Kernels. Pioneer Hi-Bred International. <> [tiny URL created Sep 2012].

Neill, S.J., Horgan, R. & Rees, A.F., 1987. Seed development and vivipary in Zea mays L. Planta, 171(3), pp.358–364.

White, C.N. et. al., 2000. Gibberellins and Seed Development in Maize. I. Evidence That Gibberellin/Abscisic Acid Balance Governs Germination versus Maturation Pathways. Plant Physiology, 122(4), pp.1081 –1088.

Wiebold, Bill. 2009. Wet Weather Can Cause Seeds to Sprout before Harvest. Integrated Pest & Crop Management Newsletter, Univ of Missouri. <>. [URL accessed Sep 2012].

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left


YOUR BEST HARVEST IS NOW WITHIN REACH J&M introduces their patented line of X-tended Reach grain carts, featuring a frontfolding single ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form