Corn residue management makes dramatic impact on emergence

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Corn growers know the satisfaction of seeing newly emerged, uniform rows of green corn plants set against the backdrop of dark, rich soils. By contrast, it can be painful to see an uneven stand from the truck window when driving past a field.

The cause of an uneven stand could be excess crop residue in the planter row.

“Corn residue will delay and outright interrupt plant establishment, and suppress the resulting plant population,” says Andy Heggenstaller, DuPont Pioneer agronomy research manager. “Corn residue is always a management issue, and high-yield production systems increase residue levels.”

Stand establishment is more of a challenge for corn than it is for soybeans, because corn is typically planted earlier, into cooler and wetter soils. Also, soybeans can accommodate reduced emergence by adding additional pods to make up for yield that could be lost from lower plant populations. That’s why hitting optimum corn plant population levels is so important.

Heggenstaller says the key is in-row residue management.

“Residue not moved out of the row has several negative impacts: preventing the planter from putting the seed in the ground, and interfering with plant emergence,” says Heggenstaller. “Residue is also a repository for bacteria, disease and insects that overwinter in stover.”

Another consideration is nitrogen (N) availability to the plants. As corn residues break down, N becomes less available in the soil — a temporary situation called nitrogen immobilization, or tie-up — reducing the amount of available N during a critical time in the growing season. Eventually, the immobilized N is released back into the soil, but often later than when it is needed most by the corn crop.

“As soil warms up, bacteria in the soil begin to consume crop residues from the previous year,” Heggenstaller says. “These bacteria require nitrogen to grow and live and break stover down. Bacteria only release nitrogen into the soil as they die off. Research shows that the longer you grow continuous corn, the bigger the nitrogen problem becomes, because stover builds up over time and takes longer to break down, requiring more nitrogen-consuming bacteria.”

An N deficit has the greatest potential for impact during the period between V8 and silking. This is when corn takes up the most N, and when residue really begins to break down quickly in the soil.

Growers have three opportunities to manage crop residues:

  • At or after harvest with a chopping header or stalk chopper. Growers should size residue immediately so it begins to break down as soon as possible. Stover harvest is also an option for managing corn residues in the fall.
  • During tillage in fall or spring. Tillage practices mix residue with soil, which allows the bacteria to go to work faster.
  • At planting, when planter attachments should be used to move residue away from the planter row. This allows the soil to warm and dry, and the crop to emerge more rapidly and more uniformly.

Growers should also consider emergence during hybrid selection. All Pioneer® brand corn products have a high residue suitability rating that can point growers to the best hybrids for heavy residue conditions.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form